Electromagnetic concentration meter

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The EC-4110-ICON electromagnetic concentration meter covers the measurement of conductivity/total dissolved solids/salinity/concentration, and can be paired with an inductive conductivity electrode. It can be applied to the concentration of corrosive chemical solutions or the dilution concentration of chemicals

Product Details

EC-4110-ICONElectromagnetic concentration meter

◼ principle

Inductive electrode

Intelligent Conductivity Transmitter…EC-4110I（ICON）

Inductive electrodes are composed of two wound metal ring coils

Wire wound metal toroids wrapped in corrosion-resistant material

Electrodes composed of corroded materials

Immerse the inductive electrode into the electrolyte liquid, controller

Release voltage to the driving coil and the liquid around the coil

Also senses voltage and drives ion current to generate

By measuring the ion current generated through the receiving coil, it is possible to

After conversion, the conductivity is obtained

The electrode itself will not directly contact the sample and can be used in solutions that corrode metal electrodes

✓ Can be used in solutions containing high concentrations of suspended solids

As long as the annular area is not altered by the sample, the reading will be accurate

✓ Suitable for measuring high conductivity solutions, cannot be used for measuring low conductivity solutions

◼EC-4110-ICONElectromagnetic concentration meterApp Market

Chemical industry: sulfuric acid, chlor alkali plants, sodium chloride, sodium hydroxide, hydrochloric acid, phosphoric acid, nitric acid, detergents, wastewater, moisture detection containing HF, washing equipment

Semiconductor: concentration monitoring, cooling water leakage detection, washing equipment, continuous acid washing, electroplating solution monitoring/control, wafer cleaning process monitoring, etching solution concentration monitoring;

Environmental water quality: wastewater monitoring, salinity

Food: Automatic cleaning application, rinse water

Pharmaceutical: pharmaceutical water, filtration dissolution process, ion exchange, purification and separation process

Other: boiler water system, flue gas scrubber

Technical Specifications

model		EC-4110I		EC-4110ICON
test project			Conductivity/TDS/Salinity/Temp/Concentration (EC-4110-ICON Only )
test scope	conductivity		000.0 μS/cm~2000 mS/cm gearSelect or automatically switch
	salinity		0.0ppt~70.0ppt
	TDS		0ppm~19999ppm； 0.00~199.9ppt
	temperature		PTC1000：-30.0~200.0˚C， NTC30K：-30.0~130.0˚C
	concentration			NaCl_28%：0-28 % HCl_18%：0-18 % HCl_39%：22-39 % HNO3_30%：0-30 % HNO3_96%：35-96 % NaOH_24%：0-24 %	NaOH_50%： 15-50 % H2SO4_37%：0-37 % H2SO4_88%：28-88 % H2SO4_99%：89-99 % H3PO4_35%：0-35 % Custom concentration table(9x9 matrix)
resolution	concentration		-	0.01%
	conductivity		0.1μS/cm、0.001/0.01/0.1/1 mS/cm
	temperature		0.1˚C
accuracy	conductivity		≥1mS/cm ±1% (±1 Digit) <1mS/cm ±10μS/cm
	temperature		±0.2˚C (±1 Digit) Equipped with temperature error correction function
temperature compensation			NTC30K / PT1K Automatic temperature compensation or manual temperature compensation
Correction mode			（1） Electrode constant correction （2） Calibration of conductivity standard solution （3） Zero point correction
Working environment temperature			0~50°C
Storage environment temperature			-20~70°C
display mode			General mode, real-time graphic mode, and trace graphic recording mode
Electrode coefficient			0.008~9.9999 cm-1 adjustable
Temperature compensation coefficient			Linear temperature compensation coefficient(0.00%~40.00%), non-linear temperature compensation, no compensation
current output			isolated0/4~20mA Corresponding specific resistance can be set/Conductivity measurementRange, load 500Ω
Event log book			provide 50 Group important events and error diagnosis records
RS485 interface			RS485(Modbus RTU or ASCII)
control	Contact output		RELAY ON/OFF Contact point,240VAC 0.5A Max.(suggestion)
	setting		Two independent groups can be set high/Control point of low point (HI/LO)
Cleaning settings			Contact output,ON 0~99 divide 59 second/ OFF 0~999 hour 59 divide
protection level			IP65
power supply			100V~240VAC±10%, 7W Max., 50/60Hz
Local size			96mm ×96mm ×132mm (H×W×D)
Hole size			93 mm × 93 mm (H×W)
weight			0.5 kg