It is required in many practical tests, and it is necessary to continuously and stably generate concentration adjustable aerosol particles with a fixed particle size distribution. Most of the spray aerosol generators have specially designed nozzles. Compressed air is blown into the liquid to be atomized through an annular gap. The shear force between the air jet port and the liquid fully disperses the droplets in this so-called annular gap to form small aerosol particles. The inertial impactor captures aerosol particles with large size and returns them to the liquid container, so that the output particle size is mainly distributed inBelow 2 μ m.

Electronic flowmeter aerosol generatorTechnical Specifications:

At the bottomParticle type：DES,PAO,DOPLiquid paraffin oil,NaCl,KCl,PSL, other salt solutions

At the bottomParticle size range of aerosol:0.1～3.0μm、0.2～0.3μm（DES sample）

At the bottomOutput particle concentration:> 10⁷/cm³

At the bottomParticle mass flow rate:2.5 kg/h（DESsample）

At the bottomflow Quantity:1.0~4.2 L/min

At the bottomqi Source: Built in air pump or external compressed air

At the bottomAir purification: built-inHEPA (High Efficiency Filter)

At the bottomMaximum backpressure:10kPa(0.1bar)

At the bottomPower requirements:AC220V±10% / 50Hz

At the bottomInstrument size:300 mm x 120 mm x 195 mm

At the bottomInstrument weight:4.8 kg

Electronic flowmeter aerosol generatorProduct Features:

At the bottomHigh concentration10⁷particle/cm³

At the bottom1.0~4.2 L/minAdjustable flow rate range

At the bottomFront mounted flowmeter, pressure regulating valve

At the bottombuilt-inHEPA (High Efficiency Filter)

At the bottomOverpressure release safety control system

At the bottomInternal and external gas source conversion

At the bottomIntuitive user control mode

At the bottomQuiet operation with low noise

At the bottomstainless steel material