Electroplating cycle magnetic pump

Electroplating cycle magnetic pumpMainly used for electroplating solution recycling, this series has PP and PVDF materials to choose from, with the following characteristics:

1. Magnet driven pump without shaft seal applies magnetic principles and adopts a dense magnetic aggregation push-pull magnetic circuit structure to achieve non-contact transmission of torque. It eliminates the shaft seal of traditional mechanical seal pumps and replaces dynamic seals with static seals to achieve fully sealed and leak free conveying media.

2.Electroplating cycle magnetic pumpIn addition to being used for electroplating solution recycling, it is also suitable for industries such as chemical, pharmaceutical, fertilizer, smelting, food, film and television printing, water treatment, etc. It is an ideal equipment for transporting liquids and various corrosive liquids.

When choosing a magnetic pump, there are several points to note:

1. When selecting the DM magnet driven pump without shaft seal for Dingchuang Machinery, please do not read the parameters incorrectly. The voltage is divided into 50HZ and 60HZ, and pay attention to the corresponding parameters;

2. There are two materials to choose from, and we can provide the name, concentration, and temperature of the conveyed liquid. Our company has professional technicians who can assist in the selection process;

3. The parameters for the catalog label are maximum flow rate and maximum head. Please refer to the performance curve table and select the model below the curve;

4. The configuration of Dongyuan or Datong motors generally depends on the delivery time of the motor. If there are special requirements in terms of motor brand and other aspects, they need to be notified before ordering.

Precautions for use

1. Due to the fact that the cooling and lubrication of the magnet driven pump bearing without a shaft seal rely on the medium being transported, it is prohibited to operate it in idle mode.

If the conveyed medium contains solid particles, a filter screen should be added to the pump inlet; if it contains ferromagnetic particles, a magnetic filter should be added.

3. The ambient temperature during use should be less than 40 ℃, and the temperature rise of the motor should not exceed 75 ℃.

4. Do not transport media that precipitate crystals.