Explosion proof dehumidifier in powder packaging workshop

Explosion proof dehumidifier in powder packaging workshop
1、 The explosion-proof dehumidifier has a wide range of applications and is specifically designed for the humidity in the workshop to prevent the product from being affected by humidity, thereby affecting the overall performance. The choice of dehumidifier is determined by the size of the space. If it is stuck at a critical point, you can choose a larger device, which is more durable and has good results. If the height of the space is relatively high, you can also choose a device with higher parameters, which can ensure the humidity of the space.

Explosion proof dehumidifier in powder packaging workshop

2、 Working principle

Adopting explosion-proof compressor, explosion-proof microcomputer humidity control, humidity display, intuitive and clear, external

Beautiful appearance, good performance, and easy operation;

The working system of the explosion-proof dehumidifier is divided into two parts:

1. The refrigeration cycle consists of an explosion-proof compressor, condenser, capillary tube, sleeve condenser, and connecting pipeline group

The low-pressure refrigerant gas is sucked in by the compressor, compressed into high-pressure gas, enters the condenser and releases heat

The condenser cools down into liquid, and then passes through the filter capillary tube to form a low-pressure and low-temperature gas mixture that enters the sleeve

Tube condenser, which evaporates into gas from the evaporator, absorbs heat from the air, and then returns to the compressor; Refrigerant worker

The quality circulates repeatedly in the refrigeration system to achieve the purpose of refrigeration;

2. The humid air in the air circulation section is sucked in by an explosion-proof centrifugal fan and enters the evaporator through an air filter

When the surface temperature of the generator is lower than the dew point temperature of the air, the air is cooled and moisture in the air is condensed

After being cooled and dehumidified, the air continues to move forward and enters the condenser, taking away the heat released by the condenser

The centrifugal fan sends out air to reduce the relative humidity in the air. The air is constantly circulating, and the moisture it contains is not

It is cooled and condensed to achieve the purpose of dehumidification;

8、 Equipment installation

1. Power wiring: Please confirm whether you have purchased a 220V or 380V power supply product and connect it as required

The power supply is ready to use;

2. It needs to be installed by a professional electrician. If there is no professional electrician, you can contact our company for guidance on installation;

If this machine uses a 380V/50HZ power supply, three-phase five wire, this machine is equipped with phase failure and phase sequence protection

When the external three-phase power supply and the machine's recognized phase sequence are incorrect, the phase sequence protector will disconnect and control

The panel displays E3, but the machine is not running. At this time, it is necessary to adjust the phase sequence of the power supply and turn it on again

Machine, this operation requires professional electrician operation;