Industrial explosion-proof dehumidifier 180L3500W high-power dehumidifier

Industrial explosion-proof dehumidifier 180L3500W high-power dehumidifier

2、 Important safety instructions:

Before using this explosion-proof dehumidifier, in order to ensure your safe operation and use, please strictly follow the instructions

Follow the instructions in this manual for operation. Please read the following important instructions carefully:

Before use, please confirm the power supply:AC220V/50HzorAC380V/50Hz;

Do not stop the running explosion-proof dehumidifier by turning off the power switch;

It is strictly prohibited to move the explosion-proof dehumidifier during operation, and be careful not to damage the cables when moving the equipment;

Do not insert fingers or rod-shaped objects into the grille, and it is strictly prohibited to stand or sit on the dehumidifier;

Explosion proof switches with appropriate current must be used, plugs are not recommended, and they must be safely grounded;

Do not operate in enclosed and narrow spaces. Non professionals are strictly prohibited from repairing or operating this explosion-proof device

Wet machine;

3、 Product Introduction:

BCF-Explosion proof dehumidifier, also known as dehumidifier, dryer, dehumidifier, etc;It can generally be divided into small sizes

Explosion proof dehumidifiers and industrial explosion-proof dehumidifiers are two major categories;The conventional explosion-proof dehumidifier consists of a rubber sealed compressor and a heat exchanger

Comprising of a converter, explosion-proof sealing fan, water container or pipe, dedicated casing, and explosion-proof controller;Its job

The principle is:Moist air is drawn into the unit by an explosion-proof fan and passes through a heat exchanger, where the water in the air is removed

Molecules condense into water droplets, and the treated dry air is discharged outside the machine, thus circulating to maintain indoor humidity

At an appropriate relative humidity;

China's position in the global explosion-proof dehumidifier market is becoming increasingly prominent;Ergong explosion-proof dehumidifier,

Applied in pharmaceuticals, chemicals, petroleum, petrochemicals, aviation, aerospace, brewing, warehousing, and other flammable and easy to burn industries

Used in explosive environments,BCF-Explosion proof dehumidifier, suitable forIIclassBGrade orCGrade, temperature group is

T1 ~T6Hazardous areas containing explosive gases0District1District2district;And it contains explosiveness

Mixture of dust and air20District21District or22All hazardous areas in the district(Ordering must specify);

-2-

fourPrecautions for Equipment Use:

1.Usage environment:This device is only available for indoor use/Environmental temperature for use:5-38℃;Try to avoid as much as possible

Used in environments with strong corrosiveness and a large amount of dust;

2.The power supply should be installed according to the nameplate on the body, and must be installed by a professional electrician. If there is no electrician available

Factory guidance for installation;

3.Machine switch:There is a switch key on the explosion-proof control panel, and it is strictly prohibited to directly turn off the explosion-proof dehumidifier during operation

The power switch is used to turn on and off the machine;

4.maintenance operations:Before maintenance, be sure to turn off the machine, cut off the power supply, and confirm that there are no explosive gases on site

Under environmental conditions, open the lid for maintenance;

5.When cleaning the filter screen, do not wet the humidity sensor at the air inlet, and it is strictly prohibited to clean the fan while it is turned on

When operating the fan blades and explosion-proof dehumidifier, it is strictly prohibited to move the machine directly, otherwise the machine will be easily damaged;

-3-

5working principle

Adopting explosion-proof compressor,Explosion proof microcomputer humidity control, humidity display, intuitive and clear, beautiful appearance, good performance, easy operation;

The working system of explosion-proof dehumidifier is divided into2Part by Part:

1.The refrigeration cycle consists of an explosion-proof compressor, condenser, capillary tube, sleeve condenser, and connecting pipeline group

Low pressure refrigerant gas is drawn in by the compressor, compressed into high-pressure gas, enters the condenser, and releases heat

The condenser cools down into liquid, and then passes through the filter capillary tube to form a low-pressure and low-temperature gas mixture that enters the sleeve

Tube condenser, consisting of The evaporator evaporates into gas, absorbs heat from the air, and returns to the compressor;Refrigerant worker

The quality circulates repeatedly in the refrigeration system to achieve the purpose of refrigeration;

2.The humid air in the air circulation section is sucked in by an explosion-proof centrifugal fan and enters the evaporator through an air filter

The low-pressure refrigerant gas is sucked in by the compressor, compressed into high-pressure gas, enters the condenser and releases heat

The condenser cools down into liquid, and then passes through the filter capillary tube to form a low-pressure and low-temperature gas mixture that enters the sleeve

After being cooled and dehumidified, the air continues to move forward and enters the condenser, taking away the heat released by the condenser

The centrifugal fan sends out air to reduce the relative humidity in the air. The air circulates continuously, and the moisture it contains is constantly cooled and condensed to achieve the purpose of dehumidification;

sixEquipment installation

1.Power wiring:Please confirm what you have purchased first220vStill380vPower supply products can be used by connecting to the power supply as required;

2.It needs to be installed by a professional electrician. If there is no professional electrician, our company can guide the installation;

3.If used locally380V/50HZPower supply, three-phase five wire, this machine is equipped with phase failure and phase sequence protection

device,When the external three-phase power supply is not in the phase sequence recognized by the machine itself,Phase sequence protector disconnected,control

Panel display E3,But the machine is not running,At this point, it is necessary to adjust the phase sequence of the connected power supply,Restart the device again,This operation requires a professional electrician to operate it;

Industrial explosion-proof dehumidifier 180L3500W high-power dehumidifier