German BURKERT plug-in electromagnetic flowmeter, original authentic imported online flowmeter

NegotiableUpdate on 05/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The German BURKERT plug-in electromagnetic flowmeter is an original and authentic imported sensor with no moving parts, a flow meter with on/off control function, and a Teach In function for relevant calibration. It is equipped with online cleaning (CIP) and FDA certified. The flow switch is available in two versions: compact and graded, with the graded version suitable for wall installation. This switch is used to measure clean, neutral, or corrosive liquids. By using the switch output terminal, the valve can be directly controlled, thereby establishing a simple two-point regulating circuit within the monitoring system.

Product Details

German BURKERT plug-in electromagnetic flowmeter, original and authentic imported

The 8041 electromagnetic flowmeter consists of an electronic module and a PVDF or stainless steel sensor. It is suitable for pipe diameters of DN06... DN400 and neutral and slightly corrosive liquids with conductivity greater than 20 µ S/cm. The 8041 electromagnetic flowmeter is equipped with 4-20 mA output, pulse output, and relay output. Different parameters can be set based on 5 DIP switches, one button, and 10 LED light bar displays. We can provide: - G2 'connectors for PVDF sensors - G2' or clamp connectors for stainless steel sensors. The 8041 flowmeter equipped with stainless steel sensors can be applied in high pressure (PN16) and high temperature (150 ° C) situations.German BURKERT plug-in electromagnetic flowmeter, original and authentic importedThe working principle of the plug-in electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In an electromagnetic flowmeter, the conductive medium inside the measuring tube is equivalent to a conductive metal rod in Faraday's test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows through, an induced voltage is generated. The induced voltage generated by measuring the two electrodes inside the pipeline. The measuring pipeline achieves electromagnetic isolation from the fluid and measuring electrodes through non-conductive lining (rubber, Teflon, etc.).In pipeline water supply, more and more flow meters are being used for metering of large water users and regional metering systems to reduce leakage rates. To achieve leakage monitoring in the pipeline network, it is necessary to monitor the low water consumption at night.