German Baode servo assisted two-way piston solenoid valve -6240

German Baode servo assisted two-way piston solenoid valve -6240

Baode, Germany6240 is a servo assisted plunger solenoid valve. The stopper is welded together with the plunger conduit to improve pressure resistance and sealing. According to different applications, various sealing materials can be selected. The valve body structure and surface quality enable the valve to have a large flow rate. The electromagnetic coil is encapsulated with chemically resistant epoxy resin. Optional slip ring bearings are available to improve service life.Electromagnetic valve is an industrial equipment controlled by electromagnetic force, which is an automation basic component used to control fluids. It belongs to actuators and is not limited to hydraulic and pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. Electromagnetic valves can be used in conjunction with different circuits to achieve the desired control, while ensuring the accuracy and flexibility of the control. There are many types of solenoid valves, and different solenoid valves play a role in different positions of the control system. Commonly used ones are one-way valves, safety valves, directional control valves, speed regulating valves, etc.If the wiring head of the solenoid valve is loose or the wire head falls off, the solenoid valve cannot be powered, and the wire head can be tightened.
The solenoid valve coil is burnt out. The wiring of the solenoid valve can be removed and measured with a multimeter. If there is an open circuit, the solenoid valve coil is burnt out. The reason is that the coil is damp, causing poor insulation and magnetic leakage, resulting in excessive current inside the coil and burning out. Therefore, it is necessary to prevent rainwater from entering the solenoid valve. In addition, if the spring is too hard, the reaction force is too large, the number of turns in the coil is too small, and the suction force is not enough, it can also cause the coil to burn out. When dealing with emergencies, the manual button on the coil can be moved from the "0" position during normal operation to the "1" position to open the valve.