Harbin Dental Clinic Sewage Disinfection Equipment Zhengao Yuanhang Quotation Ozone Generator

Harbin Dental Clinic Sewage Disinfection Equipment Zhengao Yuanhang Quotation Harbin Dental Clinic Sewage Disinfection Equipment Zhengao Yuanhang Quotation

Performance description of chlorine dioxide generator equipment:
1. Functions of the safety control system for chlorine dioxide generator equipment:
(1) Imported microprocessor controller is used for on-site/remote start stop management.
(2) The operation protection unit of the chlorine dioxide generator equipment has interlocking protection functions such as power water undervoltage/undercurrent, material shortage alarm, and automatic shutdown.
(3) On the premise of achieving the above local control and display functions, the chlorine dioxide generator equipment provides a remote communication interface, which can simultaneously realize the remote start and stop control of each individual equipment in the chlorine dioxide preparation and dosing device in the central control room, as well as the handling of abnormalities and accidents, achieving efficient automation management of the system.
2. Chlorine dioxide generator equipment reaction system
(1) The conversion rate of raw materials is over 98%.
(2) PVDF with pressure resistance and high concentration chlorine dioxide corrosion resistance is used. The temperature resistance reaches 150 degrees.
3. Raw material supply and metering system for chlorine dioxide generator equipment
(1) Adopting German RDOSE precision electromagnetic metering pump and constant back pressure device to ensure accurate raw material measurement and equipment service life.
(2) The chlorine dioxide generator equipment is equipped with German RDOSE multifunctional valves and injection valves to ensure the safe and reliable operation of the metering system.
(3) Equipped with a detachable large capacity raw material filter to further ensure the safety of the metering pump.

The Zhengao Yuanhang fully automatic chlorine dioxide generator system consists of a chemical method chlorine dioxide generator, which consists of a feeding system, a reaction system, a safety system, an automatic control system, and an absorption and dosing system.

Principles and processes of hospital sewage treatment

1. Comply with relevant national and local environmental laws, regulations, and technical policies;

2. Adopt mature process technology and equipment, fully leverage their advantages, meet design requirements, and ensure stable operation;

Implement the principle of energy conservation in the design, minimize the cost of wastewater treatment and operation, achieve resource utilization, and strive to obtain maximum economic benefits;

4. Fully consider the convenience of engineering operation, management, and maintenance, and reduce labor intensity;

Take necessary measures to minimize environmental impact and avoid secondary pollution;

Reasonably reduce project costs and operating expenses, improve project efficiency, and maximize system reliability

Entering the operation interface, there are two control systems: YH-77 and YH-88;

(1) YH-77 operation interface process: Start the device to enter the operating system interface, first select the control state. The running status is green, and the stopping status is red.

A. Manual control status: Manually start and stop the self-priming pump and disinfection pump.

B. Automatic control state: The equipment is controlled by the liquid level signal. When the incoming water signal is detected, the equipment starts running. When the incoming water signal is cancelled, the equipment stops after a set delay time.

C. Loop control state: The device is controlled by the set time and starts and stops intermittently.

(2) YH-88 operation interface process: Start the device to enter the operating system interface, first select the control state. The running status is green, and the stopping status is red.

A. Manual control status: Manually start and stop the self-priming pump, disinfection pump, and lifting pump.

B. Automatic control state: The self-priming pump and disinfection pump are controlled by the liquid level signal. When the incoming water signal is detected, the equipment starts running. When the incoming water signal is cancelled, the self-priming pump and disinfection pump will be delayed and stopped according to the set delay time. The lift pump is controlled by the water tank level signal, starting at high level and stopping at low level.

C. Cycle control state: The self-priming pump and lifting pump are controlled by the set time and start and stop intermittently. The lift pump is controlled by the water tank level signal, starting at high level and stopping at low level.