Heavy metal capture agent for industrial wastewater treatment

Heavy metal capture agentThe appearance is transparent to light yellow green liquid, which can be used in mild and widePHWithin the range of value conditions, it reacts with various heavy metal ions in wastewater and rapidly generates insoluble, low water content, and easily filtered flocculent precipitates in a short period of time, completing the reaction process and achieving the goal of removing heavy metal ions from wastewater.

Produced by Dingdong Water Treatment Filter Material Factory in Gongyi CityHeavy metal capture agentStrong chelating ability, stable sediment, low and stable sludge volume, no secondary pollution, and good performance in various wastewater fields.

Instructions for Use:1Firstly, detect the content of various heavy metal ions in the wastewater, and then determine the most suitable dosage of chemicals through wastewater simulation dosing experiments.2Before adding the medicine, lime should be used to treat the wastewaterPHAdjust the value to neutral or slightly alkaline.3Determine the daily dosage of chemicals based on the amount of wastewater that needs to be treated, dilute them in a dedicated dosing system, and combine them with coagulants and coagulants to treat wastewater.4After concentrating and precipitating the wastewater, the filter cake containing heavy metals can be deeply buried after being filtered by a filter press. The filtrate can be discharged in compliance with standards after neutralization.

Heavy metal capture agents are suitable for mixed treatment of heavy metal wastewater containing copper, nickel, cadmium, chromium, cyanide, etc. in industries such as mining and metallurgy, machinery manufacturing, chemical engineering, electronics, instrumentation, metallurgy, electroplating, printing and dyeing, mining, mineral processing, petrochemicals, leather, pharmaceuticals, coking, etc.

The water quality of each industry is different, and the selected chemicals and dosage will also vary accordingly. Before use, experiments must be conducted to confirm the dosage. Heavy metal scavengers should be stored in a cool and dry place under sealed conditions. Generally, plastic drums are used for packaging,25kilogram/Bucket, or according to specific customer requirements, attention should be paid to labor protection during operation, avoiding contact with skin, eyes, etc. Immediately rinse with plenty of water after contact.