High power small household appliance vertical hammer crusher

NegotiableUpdate on 04/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-power small household appliance vertical hammer crusher adopts hammering crushing treatment. The wear-resistant hammer head on the crusher rotor strikes the scrap metal, tearing and extruding it into blocks of less than 50mm, while removing rust, paint and other debris on the surface of the scrap metal.

Product Details

Disclaimer: The prices marked on the entire website of Enpat Company are all prepaid amounts, and the specific prices are subject to the contract agreement.

High power small household appliance vertical hammer crusherAdopting hammer crushing treatment, the wear-resistant hammer head on the crusher rotor is used to strike the scrap metal, thereby tearing and extruding it into blocks of less than 50mm, while removing rust, paint and other debris on the surface of the scrap metal.

Scrap metal throughHigh power small household appliance vertical hammer crusherAfter crushing, it can reduce the time and cost of using scrap metal for smelting, greatly simplify the recycling process of scrap aluminum, improve work efficiency, and reduce environmental pollution.

Hammer crusher is a high-yield crushing equipment for metal recycling and processing. It can use its high-strength crushing blade shaft to hammer and break waste metals, thereby reducing volume and removing surface impurities.

大功率小家电立式锤式破碎机

This device is an efficient crushing equipment specifically designed for processing lightweight aluminum materials. It is made of shredding technology and high-strength wear-resistant materials, which can easily meet the crushing needs of various lightweight aluminum products. By using strong shear and tearing forces, the scrap aluminum material is quickly torn into small pieces or sheets, greatly reducing the material volume and improving the efficiency and convenience of subsequent processing.

大功率小家电立式锤式破碎机

Firstly, the scrap aluminum material is fed into the feeding port and then conveyed into the shredding chamber through the conveying device. In the shredding chamber, the high-speed rotating blade shaft drives the blade to vigorously shear and tear the scrap aluminum, cutting it into small pieces. At the same time, the equipment is designed with an anti winding mechanism to ensure that waste aluminum does not get tangled together during the processing, affecting the crushing effect. After crushing, the small pieces of scrap aluminum are then discharged through the discharge port, ready for the next step of separation, purification, or smelting treatment.