Hot cleaning furnace manufacturer

NegotiableUpdate on 04/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Hot cleaning furnace manufacturers are environmentally friendly equipment used for paint and plastic removal in spray painting workshops, as well as for peeling off paint and plastic powder on metal surfaces. Nowadays, many companies choose to use Suzhou Liaochen hot cleaning furnace equipment for treatment, which is environmentally friendly, smoke-free, and meets emission standards.

Product Details

Hot cleaning furnace manufacturer

Features:

1. The treatment of hot cleaning furnaces goes beyond the high cost, toxicity, harm to operators, large deformation of workpieces, and environmental pollution caused by traditional incineration and chemical methods. Using a hot cleaning furnace not only has low cost, low labor intensity, and minimal work deformation, but also is safe, non-toxic, and pollution-free.

2. The operation is simple, just press the start button to complete the entire process, and there is no need for specialized training for the operator.

3. Reduce energy consumption (50% of similar products), with no special requirements for the quantity, shape, or size of workpieces, ensuring that the workpieces are not deformed.

4. Adopting a sealed design ensures the sealing performance.

5. Using aluminum silicate fiber as the main insulation material ensures good insulation performance and service life.

6. The combustion engine and main control components are all imported parts.

7. Equipped with programmable logic controller (PLC) and solid-state relay.

8. Advanced smoking control methods, emissions comply with national standards, GB16297-96 and GWPB3-99.

9. There is a five level security protection system.

Including "main combustion chamber", "auxiliary combustion chamber", "door", "explosion-proof door", "chimney", "trolley", "water system", "electronic control system", "gas system".

Hot cleaning furnace manufacturerMain combustion chamber and auxiliary combustion chamber

furnace door

Isolate the external environment to ensure oxygen deficiency in the main combustion chamber, i.e. no air leakage, providing basic guarantee for the orderly operation of the main combustion chamber. The hard pressed seals around the door are vulnerable parts and should be replaced according to the frequency of use.

We will place the items (hanging workpieces) that need to be peeled off and decomposed on the trolley in the main decomposition chamber. In the main decomposition chamber, they will be heated by a combustion engine. Here, we will isolate the flame of the combustion engine (using a ventilated refractory furnace to isolate the flame, only outputting heat), so that the organic coating on the surface of the workpiece gradually decomposes into gas (black smoke decomposition products). This process needs to be controlled at all times to ensure the speed and concentration of decomposition products, so as to ensure that the gas can be processed when entering the secondary combustion chamber. When the gas enters the secondary combustion chamber, it is subjected to high-temperature treatment by a secondary combustion engine (in an environment of about 600-900 ℃), and the supplementary oxygen combustion mainly generates carbon dioxide and water vapor emissions. The two sets of thermal systems included are independent systems, both of which are automatically controlled by an electronic control system to regulate the temperature and atmosphere inside the furnace. The entire process is controlled by a program to automatically control the water spray system, strictly controlling the decomposition rate and concentration. After the equipment automatically shuts down, only powdery inorganic substances that are not affected by temperature remain on the workpieces in the furnace, some of which fall into the bottom of the furnace, and a small amount of the remaining only needs to be lightly tapped or rinsed with a water gun.