IH chemical pump centrifugal pump

IH chemical pump is a single-stage single suction (axial suction) cantilever centrifugal pump, which is a standardized chemical pump product in the pump category. It is used to transport liquids that do not contain solid particles, have corrosiveness, and viscosity similar to water. The marking, rated performance, and size of stainless steel chemical pumps are equivalent to the international standard ISO2858, which has the characteristics of wide performance range, high efficiency, high "three modernizations" level, and easy maintenance. Its efficiency is on average 5% higher than that of F-type pumps, and it is an energy-saving product promoted by the country.

IH stainless steel chemical pump product overview:
IH chemical pump is a single-stage single suction (axial suction) cantilever centrifugal pump, which is a standardized chemical pump product in the pump category. It is used to transport liquids that do not contain solid particles, have corrosiveness, and viscosity similar to water. The marking, rated performance, and size of stainless steel chemical pumps are equivalent to the international standard ISO2858, which has the characteristics of wide performance range, high efficiency, high "three modernizations" level, and easy maintenance. Its efficiency is on average 5% higher than that of F-type pumps, and it is an energy-saving product promoted by the country.
IH stainless steel chemical pump product usage:
The IH stainless steel chemical pump can transport medium temperatures ranging from -20 ℃ to 105 ℃. If necessary, a double end sealed cooling device can be used to transport medium temperatures below 300 ℃. Suitable for industries such as chemical, petroleum, metallurgy, power, papermaking, food, pharmaceuticals, environmental protection, wastewater treatment, and synthetic fibers for transporting various corrosive or non polluting media similar to water.

Our IH chemical pump products are all designed and optimized using computers. The company has strong technical strength, rich production experience, and comprehensive testing methods to ensure stable and reliable product quality.

Technical parameters of IH stainless steel chemical pump:
Flow rate: 6.3-400m3/h;
Lift: 5-132m;
Speed: 2900, 1450r/min;
Power: 0.55~110KW;
Imported diameter: 50-200mm;
Maximum working pressure: 1.6Mpa.

IH stainless steel chemical pump model meaning:
IH 80-65-160A
IH - International Standard Chemical Centrifugal Pump
80- Inlet diameter mm
65- Discharge outlet diameter mm
160- nominal diameter of impeller mm
A - The outer diameter of the impeller is cut for the first time

Structural description of IH stainless steel chemical pump:

serial number	name	Material Science
1	Pump body	ZG1Cr18Ni9Ti
2	Oral Ring	ZG1Cr18Ni9Ti
3	impeller	ZG1Cr18Ni9Ti
4	Pump cover	ZG1Cr18Ni9Ti
5	mechanical seal	Tetrafluoroethylene, alumina, silicon carbideHard alloy
6	Bracket	HT200
7	Pump shaft	1Cr18Ni9Ti
8	Base	HT200