IHG stainless steel vertical pipeline centrifugal pump

1IHGB stainless steel vertical pipeline oil pumpAlso known as a vertical centrifugal pump, it isDongquan Pump IndustryThe water pump experts in the Technical Research Institute selected domestic hydraulic models and used the performance parameters of IS type centrifugal pumps and SG type pipeline pumps. They cleverly combined and designed them based on general pipeline booster pumps. At the same time, suitable vertical hot water pumps, stainless steel pipeline pumps, and explosion-proof centrifugal pumps were derived from pipeline centrifugal pumps according to different operating temperatures, media, etc. This series of centrifugal pump products has the advantages of high efficiency, energy saving, low noise, and reliable performance.

IIIHGB stainless steel vertical pipeline oil pumpProduct Features

1.IHG stainless steel vertical pipeline centrifugal pumpIt is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in pipelines like a valve, with a compact and beautiful appearance, small footprint, and low building investment. If a protective cover is added, it can be used outdoors.
2.Pipeline oil pumpThe impeller is directly installed on the long shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise of the pump.
3.Vertical pipeline oil pumpThe shaft seal adopts mechanical seal or mechanical seal combination, using imported titanium alloy sealing ring, medium-sized high-temperature resistant mechanical seal, and hard alloy material, wear-resistant and corrosion-resistant polytetrafluoroethylenemachineSealing can effectively extend the service life of mechanical seals.
4.IHG stainless steel vertical pipeline centrifugal pumpEasy installation and maintenance, no need to disassemble the piping system, just remove the pump coupling nut to extract all rotor components.
5. Pipeline oil pumps can be used in series or parallel according to the requirements of flow rate and head.
6.IHG stainless steel vertical pipeline centrifugal pumpVertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

3、 IHGB stainless steel vertical pipeline oil pumpmain purpose

For transporting petroleum products such as gasoline, kerosene, diesel, etc., the temperature of the transported medium is -20 ℃~120 ℃. It can also be applied in energy, metallurgy, chemical industry, textile, papermaking, as well as hotels, restaurants and other boiler high-temperature hot water pressurized circulation transportation and urban heating system circulation pumps.
　Note: The suction pressure of the pipeline oil pump is ≤ 1.0MPa, or the high working pressure of the pump system is ≤ 1.6MPa, that is, the suction inlet pressure pump head is ≤ 1.6MPa, and the pump static pressure test pressure is ≤ 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel pump body and copper impeller during manufacturing. The ambient temperature is less than 40 ℃ and the relative humidity is less than 95.