Industrial high temperature and high pressure steam cleaning machine

Industrial high temperature and high pressure steam cleaning machineApplication fields:

1. Large chemical enterprises, offshore drilling platforms, pharmaceutical factories, de icing and rust removal, warehouses and other places;

2. Internal and external cleaning of steel containers or equipment such as reaction vessels, oil storage tanks, and cement rotary kilns;

3. Daily cleaning and rust prevention of surfaces and interiors of transportation vehicles such as ships and containers;

4. Cleaning, roughening, and surface coating removal of concrete at construction sites;

5. Surface non-destructive sand removal and daily cleaning of castings, molds, etc;

6. Removal of paint from floor grilles and vehicle body spray painted with rocker panels in the painting workshop of automobile manufacturing plants;

7. Phosphorus removal, rust removal, and oil pollution cleaning on steel surfaces;

8. Daily cleaning and dredging of heat exchangers and condensers;

9. Internal cleaning and dredging of municipal water supply and drainage pipelines, oil and gas pipelines, etc.

10. Cleaning of railway locomotives, locomotive depots, machine repair workshops, and high-speed railway circuit insulators.

11. It can be used for oilfield oil extraction operations, petroleum drilling, tubing and drill pipe cleaning, etc.

Industrial high temperature and high pressure steam cleaning machine

routine maintenance

1. Check the lubricating oil level in the crankcase of the high-pressure pump daily and replace the lubricating oil every three months;

2. Clean the inlet filter every two weeks;

3. Clean the fuel nozzle and ignition electrode assembly once a month;

4. Replace the fuel filter once every three months;

5. Disassemble and clean the high-pressure oil pump once every three months.

troubleshooting

1) The spray gun does not spray water a) The inlet and inlet filter are blocked. b) The nozzle is blocked. c) If the heating spiral tube is blocked, remove the scale if necessary.

2) Unstable outlet pressure a) Insufficient water supply. b) The air is sucked into the pipeline due to reasons such as pipeline rupture and the cleaning agent nozzle not being inserted into the cleaning agent. c) The nozzle is worn out. d) The high-pressure water pump seal is leaking water.

3) The burner does not ignite and burns a) Insufficient air intake leads to white smoke emission. b) The fuel filter, fuel pump, and fuel nozzle are dirty and blocked. d) The solenoid valve is damaged. e) The position of the electrode has changed, and the spark is too weak. f) The high-voltage ignition coil is damaged. g) Pressure switch damaged.