Injection rake teeth

The injection rake teeth are equipped with multiple cleaning teeth due to the rotating chain of the grid machine, resulting in high cleaning efficiency and cleaning; Due to the special structural shape of the rake teeth, when the rake tooth chain carries debris to the upper end and moves in reverse, relative self-cleaning motion occurs between the front and rear rakes, causing debris to fall off by gravity. A rotating cleaning brush can be installed at the back of the equipment to further remove the dirt trapped in the rake teeth. If you need to place an order, please indicate it.

Principle of injection rake teeth:

It is controlled by the electrical control system instructions to drive the transmission mechanism and the moving grid plate group to move alternately relative to the static grid plate group through the driving device placed on the upper part of the grid. The stepped tooth surfaces of the moving and static grid plate groups are used to intercept floating objects in the water and slowly lift them step by step to the slag discharge outlet of the grid, achieving the purpose of interception and cleaning.

According to the direction of water flow, the rake chain is similar to a grille, and the clearance between the rake teeth assembled on the rake chain shaft can be selected according to the usage conditions. When the rake teeth separate solid suspended solids in the fluid, it ensures smooth flow of water. The entire work process can be continuous or intermittent.