Installation of fiberglass desulfurization and dust collector

Fiberglass desulfurization and dust collectorinstallEasy to maintain, sturdy and durable, with a generous design, small footprint for segmented assembly, and convenient transportation. It uses composite materials such as fiberglass resin and high-temperature resistant fiberglass resin to increase wear resistance, temperature resistance, and extend service life. After the FRP foam dust remover is carried out, inspection and cleaning facilities are added, which has a good governance effect on the air purification and flue gas purification containing corrosive dust. The lining structure is made of fiberglass material, which is heat-resistant and corrosion-resistant

The foam dust remover is a wet dust remover with simple structure, easy operation, simple maintenance, few spare parts and stable operation. It is a dust removal equipment in the wet coke quenching process of the coking plant, and is also used for smoke suppression, dust removal and air purification in mining, metallurgy, chemical industry, building materials and other industries. The working principle of the foam desulfurization dust remover is composed of six parts, namely, air inlet chamber, sieve plate, water filter baffle, air outlet, mud valve and water supply system. Under the action of the fan, the dusty air enters from the side of the cylinder. Because the cylinder area is larger than the air inlet area, the air flow velocity decreases, and the air flow velocity on the cylinder surface rises evenly. When passing through the sieve plate hole, due to the air flow, The water on the sieve plate blows up the foam layer, increasing the gas-liquid contact area, so that the dusty air and water can fully contact and wash away the dust in the air. The purified air continues to rise, and when passing through the second baffle, water droplets in the air attach to the baffle and drip on their own. The air is discharged from the outlet to the outside through the fan. The water containing sludge on the sieve plate partially flows into the lower cylinder through the sieve plate holes. Part of it flows into the mud valve through the middle overflow pipe. Due to the water seal effect, it can prevent air from entering the dust collector from the mud valve, reducing the amount of equipment air leakage. According to the drainage volume, adjust the drainage valve inside the cylinder to ensure smooth flow of mud. To maintain good sealing. The water supply system uses solenoid valves to control switches. Adjust the water supply and air volume in the cylinder as required, control the height of the foam layer, and make the foam even.

Fiberglass desulfurization and dust collectorinstallGenerally, technical guidance or on-site installation can be provided by the production factory.