Installation of sand water separator

NegotiableUpdate on 03/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Installation of sand water separator: The sand water separator is balanced and placed on the working platform. The bottom must be fixed with expansion bolts to the ground without obvious vibration before it can operate. At the same time, the hopper and other equipment should be connected. When using, the reducer must be filled with mechanical oil to the oil level, the power must be turned on, the button should be pressed, and the screw rotation direction should always be towards the material outlet direction. After starting, the staff must pay attention to whether there are hard debris in the materials. Once any abnormal situation is found in the conveyor, it should be stopped immediately to troubleshoot before resuming operation. When the sand water separator is in operation, the protective cover must not be removed. If there is a break of more than 24 hours during the operation of the sand water separator, an operator must be present to observe when resuming work.

Product Details

Installation of sand water separator:Sand water separatorBalanced placement on the work platform, the feet must be fixed to the ground with expansion bolts,Only when there is no obvious vibration can it operate, and at the same time, the receiving hopper should be connected to other equipment,When using, the reducer must first be filled with mechanical oil to the oil level,Connect the power, press the button, and observe if the screw rotates in the correct direction,The screw always rotates in the direction of the material outlet. After starting, the staff must pay attention to whether there are hard debris in the materials. Once any abnormal situation is found in the conveyor, it should be stopped immediately to troubleshoot before resuming operation. When the sand water separator is in operation, the protective cover must not be removed. If there is a break of more than 24 hours during the operation of the sand water separator, an operator must be present to observe when resuming work.