Integrated Fire Protection Underground Water Tank Manufacturer with Box Pump

Integrated Fire Protection Underground Water Tank Manufacturer with Box PumpXBZ-432-0.53/60-M-II

1. Corrosion resistance: The inner layer of the composite plate is made of SUS304 food grade stainless steel, which has high corrosion resistance. The outer layer is made of hot-dip galvanized steel plate, and after installation, anti-corrosion coating is added, which has multiple corrosion resistance properties.

2. High strength: BDF water tanks have high strength due to the good resistance of galvanized steel plates to internal and external pressure.

3. Ideal mechanical construction: From a mechanical perspective, the protruding part of the dual water tank adopts a sphere.

4. Non leakage: The structural design has no welding combination on site. High strength, good sealing, preventing secondary pollution of water quality.

5. Easy construction: Users can choose any combination of length, width, and height (standard panels are 1m * 1m, 1m * 0.5m) for the water tank according to design needs. There are no special requirements for installation on site, especially suitable for buried and oversized water tanks, commonly seen in fire water tanks, and can provide insulation services (polyurethane foam insulation, rock wool and rubber insulation)

Integrated Fire Protection Underground Water Tank Manufacturer with Box PumpXBZ-432-0.53/60-M-II

6. Requirements for stainless steel water tank concrete foundation: The height difference of the concrete foundation plane should be less than 5mm, the spacing between each beam should be 100cm, and the height should be greater than 50cm.

Scope of Application

1. The storage of cold water, hot water, fire water and other water supply in industrial and civil buildings, as well as in domestic use, adopts a system expansion condensate tank;

2. Raw water tanks, intermediate water lanes, clean water tanks, and sewage treatment tanks for environmental protection equipment in the water treatment industry;

3. Liquid storage tanks for the food and beverage, pharmaceutical, and chemical industries, as well as supplementary water tanks and insulated water tanks for the boiler industry;

4. Thermal energy sources such as solar energy and air heat pumps are paired with insulated water tanks.

Use and maintenance of buried water tanks

1. The variable frequency constant pressure water supply equipment should be selected in a well ventilated, dust-free, and non humid area with an environmental humidity of -10 ℃ -40 ℃. Rainproof and lightning protection facilities should be installed outdoors. 2. For the convenience of equipment installation and maintenance, a 70cm space should be left around the equipment, a 1.5m space should be reserved at the manhole, and drainage ditches should be set up on the surrounding ground. 3. After selecting the site, the foundation should be prepared and the tank support seat should be poured with concrete or built with bricks and stones. After the base solidifies, lift the tank and stabilize it, then install the accessories and turn on the power. 4. Before the test drive, the water supply valve should be closed first, and the condition of each sealing valve should be checked to ensure that there is no leakage. After driving, attention should be paid to the direction of the pump. When the pressure gauge pointer reaches the upper position, the pump automatically stops. Open the water supply valve to supply water normally. If timed water supply is required, turn the selection switch to the manual position.

More inquiries about models can be obtained online or offline. Our company is dedicated to serving you!