Integrated complete set of equipment for vacuum flushing device and sewage treatment

NegotiableUpdate on 05/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The vacuum flushing device first adjusts the opening and closing of the flushing door. Open the middle flushing valve of the sedimentation tank and allow the water that previously existed above to flow into the flushing door storage tank. As each flushing door storage tank has a water level difference, the water will flow into each flushing door storage tank one by one along the storage tank. When the water level rises to a high level in each flushing door storage tank, close the middle flushing valve of the sedimentation tank. (The stored water in the pump room can also be used for flushing door debugging)

Product Details

Vacuum flushing deviceadvantage

The portal hydraulic flushing system uses a hydraulic transmission mechanism, which is low-energy, environmentally friendly, economical, and efficient. The portal self flushing system utilizes a high-efficiency flushing water tank with water retention, without the need for any external power, external water supply, or complex control systems. The system is controlled by a float switch of a low-level reservoir (collection well) for automatic flushing, with a simple structure and reliable operation. Durable and long-lasting

The flushing wave generated by the self flushing system is a typical sweeping wave with very strong cleaning power. Ensure that there are no dead corners of sedimentation during the flushing process, and the entire process is safe, automated, and maintenance free.

Vacuum flushing deviceadvantageMature and complete technology, reliable and stable operation

The portal hydraulic flushing device is automatically flushed by the control system according to the emptying water level in the pool, either grid by grid or corridor by corridor, or completely flushed at once. It consumes very little power, not exceeding 0.55KW, and consumes electricity instantly during flushing. It is a typical energy-saving and environmentally friendly product.

The interception self flushing device is a self flushing device used to remove sediment from rainwater storage tanks (both square and circular), and can also be used to flush large drainage pipelines. At present, it has been used in the Shanghai World Expo Park: Puming Pump Station storage tank, Houtan Pump Station storage tank, Nanmatou Pump Station storage tank, Mengzi Pump Station storage tank, etc. The actual application effect is good. The working principle of this device is to divide the storage tank into several flushing corridors, each flushing corridor is equipped with a separate water storage chamber structure, and rainwater is stored in the water storage chamber structure in advance. After the storage tank is completely emptied, the blocking door in the water storage chamber opens, forming a strong flushing wave to flush each flushing corridor. The entire operation process is automatic, and the effective flushing distance of a single flushing wave can reach 100m. The flushing intensity is high, the flushing effect is very good, and the operation is stable and reliable

Vacuum flushing devicecleaning system

After the storage tank is emptied, the residual dirt and debris at the bottom of the storage tank can be automatically and sequentially washed clean by this flushing device; The flushing water is discharged by the sewage lift pump in the pump room. The main working principle is as follows: firstly, the rainwater storage tank is divided into five flushing corridors, and a separate water storage chamber structure is set at the inlet end of each flushing corridor. Then, the door type self flushing system is installed on the partition wall between the flushing corridor and the water storage chamber. Rainfall begins, rainwater storage tank;