Integrated dust removal, desulfurization, and removal of harmful gases

Integrated dust removal, desulfurization, and removal of harmful gasesIt refers to the process of dust removal, desulfurization, and removal of harmful gases from flue gas in the same process. This technology achieves this process through the improvement and innovation of bag filter technology, so we call it the integrated bag filter technology for dust removal and desulfurization. Named after this, people can vividly understand that this technology adds the functions of desulfurization and removal of harmful gases on the basis of bag filters, or understands the use of bag filters with desulfurization and removal of harmful gases.

This integrated bag filter technology retains all the technical features of bag filters in terms of performance. Considering that bag filters have been widely used in industries such as building materials, chemicals, metallurgy, non-metallic minerals, and grain; We will no longer provide a detailed introduction to the technical principles of dust collection, but will focus on the relevant desulfurization and harmful gas removal technologies.

Integrated dust removal, desulfurization, and removal of harmful gases

The harmful substances in the exhaust gas of garbage incinerators and the sulfur in coal from coal-fired boilers mainly exist in the form of sulfur dioxide after combustion. This gaseous sulfur dioxide and harmful gases cannot be collected and captured by any other type of dust collector. This technology achieves desulfurization and removal of harmful gases by spraying hydrated lime powder and reaction aids into flue gas containing dust, sulfur dioxide, and harmful gases. Sulfur dioxide, harmful gases, and hydrated lime undergo chemical reactions with the assistance of reaction aids to form solid calcium sulfateCaSO₄)Like other attachments, it adheres to dust or condenses into fine particles, which are collected together with the dust by a bag filter.

The dosage of hydrated lime powder and additives is determined by the content of sulfur dioxide and harmful gases in the flue gas. A multi-component gas automatic measuring device is installed during the process to ensure the economic efficiency of the dosage of dry powder and reaction additives. Lime powder and reaction additives are stored in their respective storage tanks, and the dosage is controlled by an automatic regulating device.

ADust emission concentration:<10mg/Nm³；dust emission concentration

BTheSO₂Emission concentration:<150mg/Nm³；emission concentration

CTheHClEmission concentration:<50mg/Nm³；emission concentration

DTheHClAnd heavy metals: meet national emission standards;HCL and heavy metal: satisfied national emission standard

EDioxins（DIOXIN）: Daily average< 0.1 eq/nm³；daily average capacity

FAverage service life of filter bag:3～5Year;Filter bag average using life:3-5years

GOperating rate with the host:100%.Running rate along with main machine:100%

The main features of this product are reflected in:Technological innovation, structural innovation, and process innovation, etc.

technological innovationThis project adopts dry process technology to remove sulfur dioxide from waste incineration exhaust gas and coal-fired boiler exhaust gas by spraying special additive active lime into the bag filter system(SO₂)And other toxic and harmful ingredients. This process technology realizes the function of bag filter with solid gas separation and gas gas separation. Provide high-level disposal equipment for the domestic treatment of waste incineration furnace exhaust and coal-fired boiler exhaust.

structural innovationThe design concept is to design a bag filter through structural innovation without changing the basic principles and dust removal efficiency of the bag filter Dust collector integrates the dry desulfurization process into it to achieve integrated dust removal and desulfurization.

Process technology innovationThis project adopts dry dust removal, desulfurization and other harmful gas process technologies to overcome the defects of secondary water pollution and system scaling blockage caused by the current wet dust removal and desulfurization process.

Characters of the product are mainly:technical innovation,structural innovation, process innovation and so on.

Technical innovation:This project adopts dry processing technology to eliminate noxious ingredients contained in the tail gas of the incinerator and coal boiler through ejecting active lime into the bag filter. This processing technology realized the function of bag dust remover which consider the needs of both solid-gas and gas-gas separation,meanwhile, it also provides the national tail gas treatment of incinerator and coal boiler with international advanced professional disposal equipment.

Structural innovation: The design concept is to product new type bag filter through structural innovation at the basis of notchanging the filter’s original priniple and dust removal efficiency.

Processing technology innovation:The current semi-drying process could cause secondary water pollution and system scale plugging, while the drying method we are adopting now can overcome such defects.