-
E-mail
wuxi-hx@163.com、liuyuhua@wuxi-hx.cn
- Phone
-
Address
No. 888 Union Road, North District, Wuxi Economic Development Zone (Hudai Industrial Park, Binhu District)
Product Categories
Wuxi Huaxing Electric Power Environmental Protection Maintenance Co., Ltd
LD type dense phase pneumatic conveying pump
NegotiableUpdate on 02/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
LD type dense phase pneumatic conveying pump
Product Details
LD type dense phase pneumatic conveying pump
1、 Overview
The LD type dense phase pneumatic conveying pump series introduces advanced technology from Sweden's Fida company and Australia's AB company. Used in fluidized ash conveying systems, it is the main equipment of positive pressure pneumatic conveying systems. It uses compressed air as power to transport powdered materials through conveying pipes to ash silos or storage bins. Suitable for conveying power plant fly ash, furnace bottom slag, limestone powder, cement, cement raw materials, mineral powder, grain and other granular materials.
2、 Main features
1. High ash to gas ratio (mixing ratio) during transportation
The length of the ash conveying pipe can reach 1:40-50 or more within 200 meters, and the air consumption is only 1/3-1/2 of that of a positive pressure dilute phase system or a negative pressure system.
The length of the ash conveying pipe can reach 1:40-50 or more within 200 meters, and the air consumption is only 1/3-1/2 of that of a positive pressure dilute phase system or a negative pressure system.
2. Low working pressure (usually 0.1-0.2Mpa) and low flow rate
While improving transportation efficiency, it effectively reduces pipeline wear and reduces compressed air consumption.
While improving transportation efficiency, it effectively reduces pipeline wear and reduces compressed air consumption.
3. High degree of automation
The system has a high degree of automation, microcomputer control, simple operation, dynamic display of operating status, fault alarm, sensitive response, complete processing functions, and is equipped with remote and manual functions. The operation and management are flexible, convenient, and reliable.
The system has a high degree of automation, microcomputer control, simple operation, dynamic display of operating status, fault alarm, sensitive response, complete processing functions, and is equipped with remote and manual functions. The operation and management are flexible, convenient, and reliable.
4. The system runs reliably
The warehouse pump has a small volume, light weight, and is easy to install and maintain. It can be directly hung under the dust hopper of the dust collector or equipped with support legs.
This system has flexible and convenient configuration, with main operating components and pipeline matching. Valves, instruments, and meters are made of standard parts as much as possible to enhance interchangeability and facilitate operation and maintenance.
The warehouse pump has a small volume, light weight, and is easy to install and maintain. It can be directly hung under the dust hopper of the dust collector or equipped with support legs.
This system has flexible and convenient configuration, with main operating components and pipeline matching. Valves, instruments, and meters are made of standard parts as much as possible to enhance interchangeability and facilitate operation and maintenance.
3、 Technical parameters
|
parameter
|
LD0.5
|
LD0.6
|
LD1.0
|
LD1.5
|
LD2.0
|
LD3.0
|
LD4.0
|
LD5.0
|
|
Inner diameter of pump body(mm)
|
800
|
800
|
1000
|
1200
|
1400
|
1600
|
1800
|
2000
|
|
Total Volume(m3)
|
0.5
|
0.6
|
1.0
|
1.5
|
2.0
|
3.0
|
4.5
|
5.0
|
|
Equipped with conveying pipe diameter
|
DN65
|
DN80
|
DN100~125
|
DN125~150
|
||||
|
Usage temperature(℃)
|
≤200
|
|||||||
|
Maximum conveying distance(m)
|
＞1000
|
|||||||
|
maximum design pressure(Mpa)
|
0.78
|
|||||||
