-
E-mail
td@zrtbdz.com
-
Phone
18083790655
-
Address
No. 26 Dongfanghong East Road, Jiangdu District, Yangzhou City
Product Categories
Jiangsu Zhengrui Taibang Electronic Technology Co., Ltd
Laboratory 8-inch water-cooled open mill
NegotiableUpdate on 03/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ZB-902 laboratory 8-inch water-cooled open mill is used in the rubber industry and is the main equipment for plasticizing, mixing, and pressing rubber in the laboratory.
Product Details
Machine model: ZB-902B laboratory 8-inch water-cooled open mill
One Product Usage
ZB-902BType 8-inch open mill (water-cooled) is used for mixing rubber or similar materials, batching experiments, etc;
In order to prevent material vulcanization caused by friction heating on the surface of the roller, a water circulation joint is left on one side of the roller for injecting cooling water;
The on/off operation instructions of this device can be controlled through touch screen or mechanical buttons.
IILaboratory 8-inch water-cooled open millTechnical Specifications:
1. Roller diameter: |
Φ200mm |
2. Roller surface width: |
500mm |
3. Rear roller speed: |
24r/min |
4. Roller speed ratio: |
1：1.35 |
5. roller Gap: |
0~8mmadjustable |
6. Upper limit of one-time addition: |
About 5kg (depending on the specific material) |
7. Roller surface treatment: |
Polishing after hard chrome plating |
8. power supply |
380V 50Hz |
9. Power: |
11kW |
10. Safety protection |
3Heavy protection (emergency stop lever, emergency stop button, foot switch) |
11. Overall dimensions: |
Approximately 1280mm x 710mm x 1600mm (length x width x height) |
12. Whole machine weight: |
About 960kg |
Note: The roller comes with a fixed speed as standard, and additional cost fees will be charged if speed regulation is required. | |
Jiangsu Zhengrui Taibang Electronic Technology Co., Ltd. is located in the historical and cultural name of Yangzhou. It was established in 2007 by Jiangdu Tiancan Experimental Machinery Factory and has developed over the past decade.
The company has a professional technical development and after-sales service team, mainly producing physical performance testing instruments and related software development,
The product involves four major sections: material mechanical performance testing, material combustion testing, high and low temperature environmental testing, and rubber processing equipment; The sales network covers the whole country and is exported to regions such as South Korea, Japan, and the Middle East.
Mainly serving petrochemical enterprises, raw material testing units, universities, and third-party testing institutions.
Similar Product Recommend
