Large caliber pneumatic tank bottom valve

Single acting pneumatic tank bottom valveGas loss reset tank bottom discharge valve Germany VATTEN

Single acting pneumatic tank bottom valveGas loss reset tank bottom discharge valve

Pneumatic skewed neck ball valves are used for discharging reaction vessels in clean industries such as pharmaceuticals, biology, fine chemicals, and food. This valve has the advantages of discharging materials, no residue, no leakage, and good sealing performance. This ball valve is used for discharging reaction vessels in clean industries such as pharmaceuticals, biology, fine chemicals, and food. The valve has the advantages of discharging materials *, no residue, no leakage, and good sealing performance. When using a mixer, the bottom material of the container can fully rotate with the water flow when the mixer is turned on, so that the material is stirred evenly. The valve is installed at a 35 degree angle, which allows the material to be discharged with self-cleaning function, making equipment maintenance more convenient in space. The valve adopts mirror polishing with a roughness of 0.2-0.45 μ m, making it cleaner to use.

Product features:

Compact structure ensures installation in small spaces

The structure is ideal both in terms of flow rate and process requirements, and there will be no turbulence during emptying

We can provide interfaces for all current standards, such as welded, clamp, or threaded

The valve body material is SUS316L

The surface of the valve body can be mechanically polished or electropolished according to customer requirements, with an accuracy of up to 0.25um

The crooked neck ball valve can be equipped with manual or pneumatic/electric

Pneumatic tank bottom discharge valve tilted neck pneumatic ball valveThe performance and purpose of the construction, installation points 1), installation position, height, and inlet/outlet direction must meet the design requirements, and the connection should be firm and tight. 2) All types of manual valves installed on insulated pipelines must not have handles facing downwards. 3) Before installing the valve, a visual inspection must be conducted, and the valve nameplate should comply with the current national standard "General Valve Marking" GB 12220. For valves with a working pressure greater than 1.0 MPa and a shut-off function on the main pipeline, strength and tightness tests should be conducted before installation, and they can only be used after passing the tests.

During the strength test, the test pressure shall be 1.5 times the nominal pressure, and the duration shall not be less than 5 minutes. The valve shell and packing shall be qualified if there is no leakage. During the tightness test, the test pressure is 1.1 times the nominal pressure; The test pressure should meet the requirements of GB 50243 standard for the duration of the test, and it is considered qualified if there is no leakage on the sealing surface of the valve disc. This valve is easy to operate, free to open, and has flexible and reliable movement; The valve disc assembly and maintenance are simple, the sealing structure is reasonable, and the sealing ring replacement is convenient and practical.

Pneumatic crooked neck ball valve, pneumatic flange crooked neck ball valve, the above prices are for reference only