Large channel anti clogging submersible sewage pump 1.4 urban sewage supply pump

Large channel anti clogging submersible sewage pump 1.4 urban sewage supply pump

ASTheAVProduct features of submersible sewage pump:

1Strong sewage discharge capacity, no blockage, and can effectively pass through a diameter of φ30～φ80Millimeter solid particles.

2The tearing mechanism can tear, cut, and smoothly discharge fibrous substances without the need for a filter screen on the pump.

3TheASTheAVThe design of the submersible sewage pump is reasonable, with a small matching motor power and energy-saving effectobvious.

4Adopting The mechanical seal of the new material can ensure the safe and continuous operation of the pump8000More than hours.

5Compact structure, easy to move, simple installation, no need to build a pump room, reducing project costs.

6The dual rail automatic installation system is easy to install and maintain, and people do not have to enter or exit the sewage pit for this.

7The float switch can automatically control the stop and start of the pump according to the required water level changes, without the need for a dedicated person to supervise.

8TheASTheAVThe submersible sewage pump can be equipped with a fully automatic protection control box to effectively protect the product from leakage, water leakage, and overload, improving the safety and reliability of the product.

Large channel anti clogging submersible sewage pump 1.4 urban sewage supply pump

ASRepair and maintenance of tear type submersible sewage pump:

ASThe tear type submersible sewage pump product is reliable and has excellent performance. Before leaving the factory, each unit hasgoodDurability. However, in order to ensure the service life of the water pump，Please refer to the following precautions:

1.The adjustment of the base cover plate has been carefully carried out Final inspection. Lubricated ball bearings are recommended for regular inspection and maintenance of water pumps. After long-term use in media with wear and tear, the gap between the impeller and the base cover plate may increase. Remove the power supply, loosen the fixing screws, and rotate the cover plate to adjust the gap to its original state(0.3～0.5mm).

2.clean:

To prevent impurities from accumulating inside the tear type submersible sewage pump when not in use, clean water can be pumped to clean the pump. If the water pump is not used for a long time, it should be placed in a dry place and attention should be paid to antifreeze.

3.Oil injection and oil change

ASThe oil chamber of the tear type submersible sewage pump has been filled with an appropriate amount of lubricating oil before leaving the factory packaging. This oil should be replaced annually.