Lightweight stainless steel frequency conversion emergency drainage pump

Lightweight stainless steel frequency conversion emergency drainage pumpProduct Overview
Usually, self suction pumps are installed on flood control and rescue vehicles for pumping operations. If encountering environments that flood control and rescue vehicles cannot enter, submersible pumps can only be used to bring the submersible pump to the site for operation. Ordinary high flow submersible pumps are bulky and require multiple people to transport them. The flow rate of low flow submersible pumps cannot meet the requirements of rescue operations. Therefore, we have developed a high-speed submersible pump for flood control and rescue based on this special requirement. This portable stainless steel submersible pump is made of high-quality stainless steel material and has strong hardness, good corrosion resistance, and durability. It is less likely to be damaged than those made of aluminum alloy material, with a flow rate of 100m3/h. up to 800m3/h, The head range is between 0-50 meters for users to choose from, and the main advantage is that the flow rate is large and the weight is light. For example, the flow rate is 400m3/h, the head is 8 meters, the motor power is 18.5KW, and the weight is only about 35kg. The portable flood control submersible pump motor uses a rare earth permanent magnet motor, which needs to rely on the permanent magnet controller in the rainproof frequency conversion control cabinet to adjust its frequency to high frequency operation, so that its flood control and rescue submersible pump speed can reach a high speed to meet the required flow rate and head operating conditions. It can also reduce the frequency operation to meet the operating conditions that require a decrease in flow rate and head. When the frequency decreases, the motor power used also decreases, achieving energy-saving and power-saving effects.

Ultra lightweight stainless steel submersible sewage pumpUsage conditions:

1. The temperature of the medium should not exceed 60, the weight should be 1.0-1.3kg/dm3, and the pH value should be within the range of 5-9.
2. In general, the pump must be used within the range of head to ensure that the motor is not overloaded. If it needs to be used within the full head range, it should be specified separately when ordering for the manufacturer to manufacture.
3. The current of the pump motor during operation shall not exceed the rated current of the motor.

Lightweight stainless steel frequency conversion emergency drainage pumpInstallation Diagram