MC-50W Switching Power Supply

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Main specifications: AC input range selectable by swtich, small size, light weight, high efficiency. Protection: short circuit/over loac. LED power indicator light. 100% full load aging test

Product Details

Main specifications

·The communication input range that can be selected by swtich has a small volume, light weight, and high efficiency

·Protection: Short circuit/Over LOAC
·LED power indicator light
·100% full load aging test
2-year warranty

model		WB-50A		WB-50B		WB-50C
output	DC voltage	CH1:5V	CH2:12V	CH1:5V	CH2:24V	CH1:12V	CH2:24V
	Voltage tolerance	±5%	+4%～-8%	±3%	+6%～-9%	±3%	+6%～-8%
	rated current	0.8A	1A	2.2A	1A	1A	1A
	current range	0.8-6A	0.2-1A	0.4-2.2A	0.1-1A	0.3-1A	0.1-1A
	rated power	49W		51W		52.8W
	Ripple and noise	80mVp-p	100mVp-p	80mVp-p	120mVp-p	100mVp-p	120mVp-p
	adjustment range	Ch1:-9%～+10%
	Setting, rise time	200ms,50ms,30ms/230VAC.
input	voltage range	170~ 263VAC,47~63Hz，235~373VDC
	alternating current	0.8A/230VAC
	efficiency	79%		80%		82%
	Inrush current	Cold start 36A/230VAC
	leakage current	＜2mA/240VAC
protect	overload	110~150% rated output power r
		Protection type: Partial layer current limiting, automatic recovery after fault
environment	Working temperature and humidity	-10℃～+50℃; 20% to 90% RH (see "Derating Curve")
	Storage temperature and humidity	-20 ° C~+85 ° C: 10%~95% relative humidity, no condensation
	vibration	10~500Hz，2G， 10 minutes/1 cycle, with a cycle of 60 minutes, along the X, Y, and Z axes respectively
safety	withstand voltage	I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC
	Isolation resistor	I/P-O/P：I/P-FG,O/P-FG：100M Ohms/500VDC
EMC	safety standards	Complies with UL1012
	EMC emission	Compliant with EN55022 standard A
other	size	1599738(LWH)
	packaging	0.52kg/45pcs/24kg/0.041 Cubic meter

Note:

All parameters not specifically mentioned were measured at 230VAC input, rated load, and an ambient temperature of 25 ℃.

2. Measure ripple and noise at a bandwidth of 20MHz using a 12 "twisted pair cable with 0.1uf and 47uf parallel capacitors terminated.
3. Tolerance: including setting tolerance, line adjustment, and load adjustment.