Magnetic driven pump

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The internal components of the magnetic drive pump are standardized, easy to assemble, and have a sophisticated structure with high performance. During the disassembly and assembly process, parts can be easily replaced without the need for any tools, making maintenance, disassembly, and inspection very easy to complete, convenient, and time-saving.

Product Details

Magnetic driven pumpMagnetic pump (abbreviated as magnetic pump) is a new product that applies the working principle of permanent magnet coupling to centrifugal pumps. It has a reasonable design, process, full sealing, no leakage, corrosion resistance and other characteristics. Its performance has reached the level of similar foreign products.

The magnetic pump consists of three parts: front cover, impeller, inner magnet, rear cover, and electric motor. The liquid receiving part of the key component consists of an outer magnetic, inner magnetic, and non-magnetic back cover. When the electric motor drives the external magnet to rotate, the magnetic field can penetrate the air gap and non-magnetic substances, driving the internal magnetic rotor connected to the impeller to rotate synchronously, achieving non-contact transmission of power and transforming the dynamic seal into a static seal.

Magnetic driven pumpProduct Features:

1. No shaft seal, no leakage.

2. Adopting a non-metallic liquid pump structure.

3. With a sturdy and durable pump body design.

4. The acid and alkali resistant magnetic pump has strong corrosion resistance.

5. Efficient design, performance *.

6. Can be matched with NEMA or IEC standard motors.

7. The acid and alkali resistant magnetic pump is easy to assemble and maintain.

8. Provide various piping methods for intubation, including flexible and flanged options, to facilitate customer selection. The metal bracket coated with corrosion-resistant epoxy resin can fully support the load of pumps and piping.

9. Equipped with Dongyuan standard motor: IP55 protection level, F-class insulation.

Example usage:

-PCB process

-Chemical factory

-Filter cycle

-Etching process

-Metal surface treatment

-Heat exchanger

-Processing of slurry liquid

In principle, it is not possible to transport slurry liquids, but using ceramic bearings (AV type) can transport liquids with a concentration of 5%, particle diameter within 50um, and hardness of around 80Hs. Additionally, please confirm with our company before using the slurry.

Product Specifications

Caliber: 40mm * 40mm

High flow rate: 330 L/min

High lift: 18 meters

Power: 750w