Meizhou Photovoltaic Field Protection Closure Immersion Steel Mesh Fence Screen Printing Material

The photovoltaic field area is enclosed with fences for protection and isolation. Fence design should consider safety, aesthetics, economy, and practicality. The height of the fence should not be less than 1.8m. When using impregnated steel mesh fence, the diameter of the steel wire should not be less than 3mm (pre plastic diameter). The spacing between fence posts should not exceed 3m, and the posts should be made of square steel pipes or round steel pipes with a wall thickness of not less than 3mm and not less than 2.5mm. The side length of the square steel should not be less than 50mm, and the diameter of the round steel should not be less than 60mm. When using anti-corrosion coating for the posts, the coating material should have a factory quality certificate, and the number and thickness of coatings should meet the design requirements. Generally, 4-5 coatings should be applied, and the total dry film thickness should be greater than 150um. The foundation of the fence net posts should be made of concrete. In seasonal frozen soil areas, the foundation ground should generally be buried below the frozen soil layer, and the specific conditions should be determined based on the geological conditions of the site. The top surface of the foundation should be no less than 150mm above the ground.

From the perspective of ensuring the safety of equipment in the photovoltaic field, photovoltaic fences are designed to prevent people or animals from climbing (drilling) and damage, and to ensure the durability of the fence. A series of regulations have been made for the form and setting of the fence around the photovoltaic field. The regulations can be used as protective fences for solar photovoltaic fields. The on-site construction and installation are simple, and the style is beautiful and elegant. The protective equipment designed for photovoltaic power stations is mainly used for protection and isolation in various areas of the photovoltaic power station It effectively prevents personal safety inside and outside the substation and theft prevention of equipment such as transformers, making it a new protective product for substations. Has a relatively long service life. The common form is mainly the border isolation protective net As a highly flexible guardrail product, the border isolation fence can be made intoSteel wire fenceThe net wall can be used as a temporary isolation net, and different column fixing methods can be used to achieve it. The border fence is made of high-quality wire rods as raw materials, and is protected by three layers of welding mesh: galvanizing, pre coating primer, and high adhesion powder coating. It has the characteristics of long-term corrosion resistance and UV resistance. The surface treatment of this type of guardrail net can be either galvanizing or spraying, and the top can be covered with a plastic cover or a rain cap. Depending on the environment and installation method, methods such as pre embedding 50cm or adding a base can be selected. Connect the mesh and columns of the frame guardrail with screws and various special plastic or iron clips. All screws are automatic anti-theft. The accessories used can also be designed according to the specific requirements of the customer.

What we know about photovoltaic power stations are large-scale distributed solar photovoltaic power stations, which occupy a large area. Therefore, if we need to enclose a distributed photovoltaic power station, using other fences would be costly. Therefore, we use our simple fence to enclose the photovoltaic power station fence. This simple fence uses: wire diameter: inner wire 3.0mm, plastic post 3.9-4.0mm aperture: 75 * 150mm column: circular tube 48 * 2.0mm (before plastic); The column height is 2.2 meters, the net height is 1.8 meters, the net width is 3 meters (distance from the column), and the surface treatment is immersion in dark green. The installation method is to embed 30 centimeters of photovoltaic power station steel wire mesh fence. Specification 2: wire diameter: 4.0mm after plastic coating, aperture: 75 * 150mm, mesh size: 1.8 * 3m (width is the distance from the center of the column), edge frame size: 20 * 30 * 1.2mm (wall thickness after plastic coating), column size: 50 * 1.5mm (wall thickness after plastic coating). Installation method: embed 30 centimeters. Surface treatment: immersion in blue and white. Instructions for use: The installation method of steel wire mesh fence is divided into embedding and chassis.