The airport enclosure adopts Y-shaped columns with anti climbing knife piercing rolling cage metal wire mesh installed

The airport perimeter is an important safety barrier that isolates the airport flight control area from the outside world,The airport perimeter is an air defense safety barrier that isolates the airport flight control area from the outside world. It is usually surrounded by Y-shaped columns or wire mesh, and it bears the responsibility of ensuring the safety of the flight control area. The establishment of airport enclosures is necessary for implementing closed management of the flight area and maintaining good order in the flight area. The management of airport enclosure mainly includes whether the enclosure is naturally damaged or artificially broken, whether there are people climbing or crossing the enclosure, whether emergency passages and locking facilities are inspected, and whether unlicensed personnel and vehicles are found.

The Flight Zone Management Department divides the perimeter into areas based on terrain conditions and conducts comprehensive inspections of the perimeter in a segmented and detailed manner. Require inspectors to conduct a thorough inspection of the perimeter they are responsible for, and conduct on-site checks to see if there are any damages, human damage, or small animal invasions. Focus on checking the size of the diamond mesh on the mesh, the tightness of the screws between the mesh, whether there is any settlement in the ground beam below the perimeter, whether the spacing between the spikes above the perimeter meets the requirements, whether the perimeter number signs are lost or damaged, whether the warning signs prohibiting crossing are firm and clearly marked, and whether there are any climbing facilities outside the perimeter. The patrol personnel made a record of the problems found during the hiking and carried out repair and treatment according to the actual situation after inspection.

The conventional standard requirements for the physical enclosure of airport flight areas are:

The net height inside and outside the physical fence of the airport should not be less than 2.5 meters. ⒉. There should be conspicuous warning signs prohibiting climbing outside the perimeter fence.

3. The total height of the airport enclosure is generally 3m, and the spacing between the columns is 3m. In order to ensure the stability of the enclosure after placement, the airport generally requires that every two columns should be equipped with a slant support, and every column at the turning should be equipped with a slant support.

4. The column of airport enclosure is 75 * 75 * 2.0mm, and the section size of slant support is 50 * 50 * 2.0mm

5. Cover the top of the column with a rainproof cap, and connect the column to the mesh with anti-theft screws.

6. The surface treatment of airport enclosure can be done by spraying, galvanizing, or dipping.

7. The airport enclosure should undergo rust removal and anti-corrosion surface treatment, and the anti-corrosion period can be guaranteed to be more than 5 years.

The above introduces some basic technical parameter requirements for airport enclosure networks. In practical engineering cases, many customers ask us to send pictures and drawings for the design institute to refer to. Many drawings will make some changes, and we will modify our machinery and equipment according to the drawings provided by the customers to ensure the production of qualified products. Due to the high safety protection of airport fencing, some high security places also choose to use airport fencing as a barrier.