Metal orifice plate corrugated packing 250Y350Y500Y

Metal orifice plate corrugated packing 250Y350Y500YUsing sheet metal as raw material,Maintained the corrugated sheet structural characteristics of the metal wire mesh corrugated filler in terms of structure,But it increased the equivalent diameter to make it more universal. Roll the thin metal plate with small holes(charge)Pressed into corrugated sheets with grooves. Assemble corrugated plates using the same assembly method as metal wire mesh corrugated plates,Assemble into a disc-shaped packing unit. The height of each plate of perforated corrugated packing is approximately50~200mmThe diameter of each tray of packing is slightly smaller than the inner diameter of the tower by a few millimeters,The corrugated sheets of adjacent upper and lower packing plates are staggered90Installation. whenD<1.5mtime,The entire tray of packing is loaded into the tower section;whenD>1.5mWhen the tower section is not connected by a flange,Prefabricate the filler into several blocks,Number binding hoop,Then it is sent into the tower and assembled into trays of packing.

Metal orifice plate corrugated packing 250Y350Y500YDivided into multiple specifications based on specific surface area as a characteristic size,The inclination angle of the ripple on the tower axis30°(X)、45°(Y)Two types. The packing is a universal and versatile regular tower packing with a wide range of separation efficiencies. Its comprehensive performance is connected to the corrugated high-efficiency tower packing of metal wire mesh,Connect ordinary bulk tower packing. Its cost is much lower than that of corrugated metal wire mesh packing;And its anti clogging performance is much better than that of wire mesh packing. The characteristics of the filler include:High flux, reduced pressure, high efficiency, strong resistance to blockage and pollution,cheapness. Therefore, it has been widely used in mass transfer separation processes such as distillation, rectification, absorption, and desorption in the petrochemical industry. Whether in designing new or old towers to meet standards or in energy-saving renovations,Used as a substitute for bulk tower packing such as Bauer rings or certain plate towers,Not only has it increased product output and quality,And it has achieved comprehensive economic benefits such as energy conservation and consumption reduction.