Metal printing gas circulation sealed vortex fan - explosion-proof fan

Metal printing gas circulation sealed vortex fan - explosion-proof fan——Product Introduction

The replacement of bearings must be carried out by personnel familiar with repair work. First loosen the screws on the pump cover, and then disassemble the parts one by one according to the order shown in the diagram. The disassembled parts should be cleaned, and then assembled in reverse order. When disassembling, do not forcefully pry the impeller, use a roller to remove it, and do not miss the adjusting gasket to avoid affecting the clearance that has been adjusted before leaving the factory. It is strictly prohibited for solids, liquids, and corrosive gases to enter the pump body. Our company's pursuit of product quality for vortex high-pressure fans is our quality goal, and our business strategy is to achieve small profits, high sales, and mutual benefit. Satisfying customers is our company's quality policy, and using a vortex air pump makes your machine more efficient and competitive. Our company solemnly promises that all models of our products are covered by a one-year warranty upon purchase or use. In case of any quality issues caused by our production, we will provide free replacement within 3 months and free repair and maintenance within 18 months.

The factory adopts a star connection method: directly connected to 3-phase 380V, which is mostly used for three-phase low-power vortex cyclones in U1/V1/W. The factory uses a delta connection method: directly connected to 3-phase 220V, which is commonly used for three-phase high-power vortex cyclones in U1/V1/W1. If it is a single-phase 220V Jinnuoke vortex cyclone machine, after disassembling the junction box, first identify a reference direction, with the air drum on the left and the air inlet on the right, counting from left to right, and the second segment on the terminal block as the 220V power terminal. The factory uses a delta connection method to directly connect single-phase 220V, which is commonly used for single-phase low-power vortex cyclones in V1/W. High pressure blower is a relatively precise type in the fan category, with relatively strict requirements for the operating environment and usage methods. In order to better maximize the efficiency and long-term service life of the high-pressure blower, it is recommended to install some necessary accessories according to different working conditions. 1. Pressure relief valve, if the high-pressure blower is used for adsorption during use.

Title of this article: Metal printing gas circulation sealed vortex fan - explosion-proof fan