Microcomputer tensile strength testing machine

NegotiableUpdate on 02/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The design of the microcomputer tensile strength testing machine integrates and absorbs advanced control technology and external design of foreign testing equipment. The machine has a beautiful appearance, easy operation, and stable and reliable performance. The machine adopts a fully digital speed regulating motor and a fully digital speed regulating system as the driving device. After being decelerated by a circular arc synchronous belt and a circular arc synchronous belt wheel reduction system, it drives the precision screw pair to load This machine has no pollution, low noise, high efficiency, and a wide speed range. Microcomputer tensile strength testing machine

Product Details

Microcomputer tensile strength testing machineProduct performance characteristics:

Adopting a dual space structure, spray coated outer cover, upper space tensile test, and lower space bending test. The main unit of the electronic multifunctional testing machine consists of a floor standing frame consisting of a guide column, an upper crossbeam, a middle crossbeam, and a worktable. The transmission part is installed at the lower part of the worktable, the load sensor is installed on the middle crossbeam, and the outer cover covers the guide column and ball screw pair.

This machine is widely used for inspection and analysis of metal, non-metal, and various composite materials. It is an ideal testing equipment for scientific research institutions, colleges and universities, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments.

Microcomputer tensile strength testing machineMain technical indicators:

Model:	HE-BS-2KN
The maximum experimental force:	2KN
Scope of experimental force testing:	2%～*fs
Effective itinerary:	500mm (excluding fixtures)
Test force grading:	The whole process is not divided into stages
Accuracy of experimental force measurement:	± 1% better than the indicated value
Displacement resolution:	0.01mm
Accuracy of displacement measurement:	± 1% better than the indicated value
Control range of crossbeam movement speed:	0.05mm/min～500mm/min
Displacement speed control accuracy:	Better than ± 1%
Using power supply:	AC single box three wire 220V 50/60HZ
Dimensions (length x width x height):	410×430×1150（mm）
Equipment weight approximately:	80Kg
Total power approximately:	1000W

3、 Equipment configuration:

One high-strength host (single arm structure)

One set of fully digital speed control system and one set of speed control motor

A set of precision ball screw pairs

A set of precision arc synchronous deceleration system

A 2KN high-precision sensor

A set of stretching aids

A set of touch screen control system