Narda AMS-8060 Electromagnetic Radiation Frequency Selection Online Monitoring System

NegotiableUpdate on 02/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NardaAMS-8060 Electromagnetic Radiation Frequency Selection Online Monitoring System Product Introduction: The most advanced solution for remote and continuous monitoring and recording of high-frequency fields ranging from 75MHz to 3GHz

Product Details

Narda AMS-8060 Electromagnetic Radiation Frequency Selection Online Monitoring System Product Introduction:
The most advanced solution for remote and continuous monitoring and recording of high frequencies ranging from 75 MHz to 3 GHz, utilizing a built-in spectrum analyzer and three-axis antenna
The AMS-8060 Select Area Monitor is a complete and flexible measu loop system that monitors high-frequency fields ranging from 75 megahertz to 3 GHz, with built-in three-axis antennas
The device also includes a powerful data logger, a backup battery on the back of the power supply, a GSM modem, and an antenna
Its sturdy structure allows it to be installed on site, whether indoors or outdoors, while its compact size and limited weight allow AMS-8060 to be easily relocated at any time
By using user-friendly software to select the area monitor, the spectrum of 20 different parts (bands) can be analyzed, displaying EMF values for each frequency band and broadband value
All measurement parameters can be easily set and modified to meet different monitoring requirements
The measurement data is recorded in AMS-8060 memory and can be downloaded to a PC, whether remotely via GSM or locally via RS232
The automatic and continuous inspection system should provide alarm signals for any abnormal situations that occur

Narda AMS-8060 Electromagnetic Radiation Frequency Selection Online Monitoring System Product Features:
Selective regional monitoring can analyze the spectra of up to 20 different parts (bands), displaying the EMF values of each band and broadband value
Several AMS-8056 area displays connected to base stations through GSM networks can be used to establish reliable monitoring systems to cover a wide geographic area, including nationwide coverage
Automatically and manually download data to the dedicated collection software for GSM modems within the PC base station for data collection and analysis
Internal rechargeable batteries for solar panels and unlimited outdoor operations
Windproof and lightweight, it can be easily installed outdoors or indoors using its specially designed pole and base
Up to 20 fully programmable frequency bands
A better and truly built-in spectrum analyzer
Built in three-axis antenna
Broadband evaluation mode
Automatic and manual data downloads to PC
Built in GSM modem in the base station
Specialized data collection software for collection and analysis
Warning and alarm transmitted to PC and mobile phone
GSM communication standard and SMS via modem

Narda AMS-8060 Electromagnetic Radiation Frequency Selection Online Monitoring System Product Parameters:

Antenna type	Three-axis electric field
frequency band	75 MHz 到3 GHz
dynamic range	0.01 to 300 volts per meter
overload	600 volts per meter
sampling rate	Reduced to 200 milliseconds (depending on frequency band settings)
memory size	288 kilobytes
Programmable frequency band	Up to 20
clock	Internal real-time clock
interface	RS-232C internal DB9 connector
standby time	Programmable steps lasting over 24 hours and 30 minutes
power supply	Backup sealed lead-acid rechargeable battery, 12V, 32A/hour, external DC power supply of 100 240 VAC to 24 VDC, 1.25A
power consumption	200 milliwatt standby disconnect receiver and GSM 2 W disconnect receiver and GSM active
Battery working time	48 hours
Operating Temperature	-10 ° C to 50 ° C
Protection level	IP54
size	Antenna cover: 260 × 740mm Base 660 × 600 × 30 Battery pack 310 × 240 × 190 Solar panel 500 × 600 × 51 Extreme 760 x 60mm
weight	About 27kg