Night light wind vane observation distance is extremely far

JT-LW-X1All-weather warning wind vane(led)

Introduction
Night light wind vane observation distance is extremely far，Placed outdoors to indicate wind direction. All metal structure,Lightweight aluminum alloyArchitecture, aluminum alloy standard plate, strong corrosion resistance. service lifeOver 20 years.Red warning layer, effective daytime indication distance exceeds3 km, equipped with outdoor anti-aging LED light strip and fully sealed explosion-proof junction box to provide AC220V AC power supply, and can also indicate the escape direction at night, indicating a distance greater than 5 km.Standardization and specialization have been achieved, and the outer surface has been polished,And high adhesion electrostatic spraying treatment,Beautiful and atmospheric.wind vaneThe length, size, and height of the pole can be customized according to customer needs.

Product Usage
Widely used in urban landscape, meteorology, chemical industry, environmental protection, agricultureMinesOilfield exploration、Chemical plant, paper millwaitHazardous gas leakage hazardIndustry.Once a gas leak occurs, the escape direction can be clearly indicated.

Product Features:

1Highly sensitive gemstone bearings that can support large radii360°rotate A gentle breeze can start.

2The surface is treated with high adhesion electrostatic spraying, without temperature difference exposure, and can be used outdoors for life.

3configuration620-760nm red light warning red label, with long propagation distance, eye-catching, and obvious warning effect.

4620-760nm red LED indicator light, visible at night. Clearly visible within 5 kilometers.

5Automatically activated at night and automatically turned off during the dayLED indication, efficient and energy-saving.
6. The direction indicated by the arrow is the escape direction, to avoid delaying the escape opportunity through secondary judgment.

7. Fully enclosed explosion-proof junction box, with EX certification.

Product Parameters
Directional marker length:1780mm (standard), customizable
Overall height: 600Mm (standard), customizable
Front panel:135×142mm（bottom*High）, customizable
Tail label plate:600×580mm (standard), customizable
branchFrame:2000mm（User customized, it is recommended to place it on the rooftop）, customizable
Luminous strip length:2500mm * 2 (double-sided)

Start wind speed:0.5m/s

Rotation radius:1000mm (requires no obstacles within the radius)

installsuggestion
1. Installation location selection:
This product is suitable for installation on the flat roof of buildings or on the flat surface of iron towers. The surrounding area should be relatively open and easy for ground personnel to observe.

（The maximum height should not exceed the height of the lightning rod in the installation area）
2. Installation:
Used for cement flooringFixed base with expansion bolts of Φ 8 × 80mm; Fix the base of the iron tower with screws at the plane; Install the main pole and base in place.
3. Attention:
The main pole should be installed perpendicular to the ground. If the installation site has a steep slope, one should be cast firstInstallation of a 300 × 300mm cement platform, which can be adjusted by adding washers at the bottom of the base if there is only a small angle of inclination.
4. Lightning protection measures:
If at a high place, the base should be securely connected to the lightning rod and lightning strip.

6*Professional personnel are required for installationAC220V power supply must be connected to this device before it can be used at night.

Packing List：
All-weather warningwind vane (Red)*1

metal columnφ89*5m *1
Explosion proof junction box (silver) *1
Product Manual *1

wrench *1

Certificate of Conformity *1