Oil proof, waterproof, fast dust removal filter plate

Oil proof, waterproof, fast dust removal filter plate

Dust holding capacity and lifespan

The dust holding capacity is 5-8kg/㎡, and the continuous operation life is 8000-12000 hours. It is recommended to replace it after 6 months in high concentration dust environments.

Pulse blowback parameters

Spray pressure: directly affects the cleaning effect, generally 0.4-0.7MPa, and 20.5MPa is required for high concentration dust.

Spray cycle: Set to 5-30 minutes based on dust concentration, and shorten to 5-10 minutes in high humidity environments to avoid excessive spray damaging the filter material.

Breathability and Energy Efficiency

The air permeability is 8-15m '/(m · min), the resistance is reduced by 30% compared to deep filtration materials, and the energy consumption of the fan is saved by 15%. Environmental adaptation parameters

Temperature resistance: -50 ℃~260 ℃ (depending on the material)

Acid alkali resistance: pH range is 2-14

Anti static: Surface resistance ≤ 109Q2.

The Tongkuai dust removal filter plate also has the advantages of corrosion resistance, pressure resistance, strong dirt holding capacity, strong adsorption, low blockage probability, high fire resistance, strong moisture resistance, repeated cleaning, good sealing effect, strong tear resistance, long service life, and low price. The application of polyester long fiber filter material not only endows the dust removal filter cartridge with good acid and alkali resistance, higher filtration efficiency, lower operating force, incomparable wear resistance, high strength, and durability compared to traditional filter materials. Pulse blowback and other methods are easier to clean the dust, and it can be repeatedly cleaned with water without damaging the filter material, extending its service life. The filtration accuracy can reach 1umm, and the filtration efficiency can reach 99.99%.

Oil proof, waterproof, fast dust removal filter plate

High filtration accuracy: It can reach around 0.3-1um, with a filtration efficiency of over 99.99% for dust particles larger than 0.3 microns, and can intercept small dust particles.

Strong chemical stability: PTFE membrane and polyester fiber material can resist the corrosion of acidic and alkaline chemicals, and maintain stable filtration performance in environments with chemical corrosion risks.

Easy to clean dust: PTFE summer film has a smooth surface, low friction coefficient, and is difficult for dust to adhere. With the use of pulse blowback and other cleaning methods, dust can easily fall off the surface of the filter element, effectively reducing operating resistance.

Good breathability: While efficiently filtering, it can ensure good breathability, ensuring stable airflow during equipment operation and reducing fan energy consumption

Excellent anti-static performance: The conductive fibers and other anti-static materials added to the filter material can promptly conduct the generated static electricity, preventing the accumulation of static electricity from causing safety accidents.

High strength and good stability: The overall structural design is reasonable, and the components such as filter material, end cap, and skeleton cooperate with each other to enable the filter cartridge to withstand pressure and airflow impact. This dust removal filter cartridge belongs to deep filtration, where the solid particles in the suspension are smaller than the diameter of the filter medium's pores. Particle filtration relies on the collision and compression of the slender and curved pores in the filter medium and the fluid to be intercepted and tightly attached to the walls of the pores. Suitable for situations where the particles in the floating liquid are very small and the content is minimal. Generally, the solid content is not high at 0.01%, and solid particles of 0.02-100um can be removed. In addition, Zero Filter Equipment Co., Ltd. is a manufacturer of dust removal filter cartridges that integrates independent research and development, manufacturing, and sales. Its products have a beautiful appearance and continuous improvement in manufacturing processes, always striving for better product quality. You can choose filter materials from brands such as HV, Toray TORAY, Donaldson, KOLON, and Ahlstrom. Only by choosing filter materials reasonably can you achieve ideal dust removal effects.