POE sheet extruder, POE board production line

NegotiableUpdate on 02/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

POE sheet extruder, POE board production line (picture) divides the head into angled head (angle of 120 degrees) and right angled head according to the angle between the head flow direction and the screw centerline. The outer shell of the machine head is fixed to the body with bolts, and the mold inside the machine head has a core seat, which is fixed to the wire inlet port of the machine head with nuts. The front of the core seat is equipped with a core, and the center of the core and the core seat has a hole for passing the core wire. A pressure equalization ring is installed at the front of the machine head to balance the pressure

Product Details

1、 Mingjiada produces POE sheet extruder: Production process: mixing machine - automatic lifting machine - cone double feeding machine - single (double) screw extruder - hydraulic automatic screen changing device - sheet extrusion mold - three roll calender - dual station unwinding device - bracket cooling - corona treatment machine device - conveyor belt - online cutting device - finished product conveying platform

2、 1POE sheet extruder, POE board production lineAccording to the angle between the material flow direction of the machine head and the centerline of the screw, the machine head is divided into angled machine heads (angle of 120 degrees) and right angled machine heads. The outer shell of the machine head is fixed to the body with bolts. The mold inside the machine head has a core seat and is fixed to the wire inlet port of the machine head with a nut. The front of the core seat is equipped with a core, and the center of the core and the core seat has a hole for passing the core wire. A pressure equalization ring is installed at the front of the machine head to balance the pressure. The extrusion molding part is composed of a mold sleeve seat and a mold sleeve. The position of the mold sleeve can be adjusted by bolts through support to adjust the relative position of the mold sleeve to the mold core, which is convenient for adjusting the uniformity of the extrusion layer thickness. The outside of the machine head is equipped with heating and temperature measurement devices.

2POE sheet extruder, POE board production lineThe equipment can produce sheets of various materials such as EVA, EPDM, TPU, ABS, PP, PE, and PS. It has the following advantages:
1. The screw adopts special mixing function and high plasticizing capacity design.
2. The hanger type mold head adopts a special double flow design to make the thickness adjustment of the board more accurate. . . ）Temperature control of plus or minus 1 ℃ can effectively control the plasticization process and the thickness and flatness of the board.
3. The three roll calender adopts a vertical or 45 degree inclined type, which can be freely raised and lowered. The thickness control of the sheet metal can be achieved by adjusting the screw and the pressure wheel in both directions to ensure the thickness control of the sheet metal.