Photoelectric/Ultrasonic Sludge Concentration Meter

>product overview
The MLSS photoelectric sludge concentration meter is designed to measure the concentration of suspended solids in municipal or industrial wastewater treatment processes

An online analytical instrument for measuring. Whether evaluating activated sludge and the entire biological treatment process, or analyzing emissions after purification treatment

The LBS-100 photoelectric sludge concentration meter can provide continuous

Accurate measurement results.
The MLSS type photoelectric sludge concentration meter consists of a transmitter and a sensor. Sensors can be conveniently installed in the pool

The LBS-100 photoelectric sludge concentration meter can automatically compensate for pollution induced sludge concentration in drainage pipes, pressure pipelines, or natural water bodies

The interference caused. The sensor is equipped with an air cleaning function, which can automatically and timed clean according to a pre-set time

Greatly reduced the workload of instrument maintenance.


Technical parameters:
Measurement range: 0-9999mg/L, 0-10g/L, 0-20g/L
Activated sludge: 0-1% silica: 0-2%
Accuracy ± 1% FS.
Resolution 0.01%
Repeatability ± 1%
Flow velocity range 0.3~3 m/s
Power 15 VA;
Pressure ≥ 10 bar
Power supply DC220 V, 50/60 Hz;
Temperature range -20 ℃~55 ℃
Output 1 channel 4-20mA current signal isolated output, * * * large load 750 ohms;
Two alarm signal relays with a capacity of 220 VAC/2 A, and the output can be set by the user;
1 flushing time relay, capacity 220 VAC/2 A, time can be set by the user.
There are two measurement units to choose from:% and mg/L.
The shell is made entirely of imported materials and meets the requirements;
Protection level IP65
Weight 2.5 kg
Temperature range 0 ℃~80 ℃
Material: 316 stainless steel.
Protection level IP68
The cable length is 10m.
Weight 0.5 kg



Product Description:

--------------------------------------------------------------------------------

FEATURES
The algorithm software of ******* enables the instrument to adapt to various applications;
High precision and stability, strong anti-interference ability;
● Easy on-site calibration;
● Built in automatic temperature compensation;
High brightness LCD displays concentration percentage, mg/l, and graphics;
4-20mA output, RS232 or 485 digital output interface, liquid level alarm and fault alarm relay output;
The protection levels of the transmitter and sensor housings reach IP65 and IP68 respectively, and can be replaced according to the special requirements of the usage scenario

Application scenarios
Urban sewage treatment plant:
Control of sludge discharge from primary and secondary sedimentation tanks;
Sludge thickening tank; Automatic control of sludge dewatering and dosing; Monitoring of concentration of returned sludge
Water supply plant:
Automatic monitoring of sedimentation tank sediment height; Automatic sludge discharge control of sedimentation tank
Industrial wastewater treatment:
Monitoring of sludge concentration, monitoring of slurry and industrial slurry concentration
Natural water bodies:
Monitoring of sediment concentration in rivers