Plastic fired board filter and dust filter

Plastic fired plate filter element

SL type plastic fired board is a vertically installed plastic fired board.

Vertical installation of plastic fired panels has the advantages of easy installation and maintenance, large filtration area, and strong dust removal ability, making it suitable for the treatment of flue gas with high dust content;

The typical model is SL1500/18,

Its size specifications are: 1550 (length) × 1047 (width) × 63 (thickness), with a single board filtration area of 9.0 square meters;

The commonly used temperature resistance of plastic fired boards is 70 ℃ (room temperature), 110 ℃, and 160 ℃;

Special performance plastic fired board: acid resistant, anti-static, explosion-proof, oil and gas resistant, etc;

In general, the inlet dust concentration can reach 500g/m3, and the exhaust dust concentration can be controlled below 5mg/m3. In high concentration dust removal systems, the dust removal efficiency reaches. Widely used in industries such as steel rolling, metallurgy, tobacco, electronics, etc.

Performance characteristics of plastic fired board:

High dust removal accuracy: With a micron sized filter aperture, it can effectively remove the majority of dust particles above 0.1um

● Large filtration area: The corrugated design of the filtration surface is suitable for

The filtration area within the same volume is 3-6 times that of the filter bag;

Strong self-cleaning ability: The rigid structure allows for anti blowing air

The body acts more directly on the powder attached to the filtering surface

Above, there is no buffer present, and the dust cleaning effect is achieved;

Hydrophobic and oleophobic: The sintered plate substrate is composed of various densities with different properties

Made by sintering polymer materials, PTFE coating penetrates deep into

Sintered plate matrix pores form ultrafine microporous anti adhesive structures with hydrophobic and oleophobic properties;

Strong acid and alkali resistance: Special resin material that can withstand long-term high-temperature corrosion from strong acids and alkalis;

● Long service life: With high strength and toughness, it can withstand thousands of repeated impacts of high-pressure gas every day. Its wear resistance is more than 4 times that of steel. In addition, its acid and alkali resistance and perfect self-cleaning effect make the service life of plastic fired plates reach more than 10 years.

● Constant pressure and stable resistance: The uniform micrometer sized pore size allows dust to only adhere to the surface of the filter layer, so the internal channels of the filter layer remain almost unobstructed. At the same time, the filter cake is cleared during blowback, resulting in constant filtration pressure and stable operating resistance during long-term operation.

● Easy maintenance and replacement: When the plastic burn plate needs to be replaced, simply turn off the two nuts on both sides of the plastic burn plate after opening the side door, which is convenient and fast.