Plate corrugated regular packing

Plate corrugated regular packingThe pressure drop can be very small, while providing more specific surface area, which can achieve higher mass and heat transfer effects in the same volume.Due to the uniformity, regularity, and symmetry of the structure, when the specific surface area is the same as that of bulk packing, the porosity of metal orifice plate corrugated packing is larger, and it has a larger flux. Its comprehensive processing capacity is much larger than that of plate tower and bulk packing tower. Therefore, various universal structured packing represented by metal orifice plate corrugated packing are applied in industry.

Plate corrugated regular packingDue to its structural reasons, it requires materials to be clean, free of solid particles, and not prone to self aggregation. Compared to stainless steel wire mesh corrugated packing, metal orifice plate corrugated packing has stronger anti blocking ability.

Plate corrugated regular packingmaterialUsing sheet metal as raw material,Maintained the corrugated sheet structural characteristics of the metal wire mesh corrugated filler in terms of structure,But it increased the equivalent diameter to make it more universal. Roll the thin metal plate with small holes(charge)Pressed into corrugated sheets with grooves. Assemble corrugated plates using the same assembly method as metal wire mesh corrugated plates,Assemble into a disc-shaped packing unit. The height of each plate of perforated corrugated packing is approximately50~200mmThe diameter of each tray of packing is slightly smaller than the inner diameter of the tower by a few millimeters,The corrugated sheets of adjacent upper and lower packing plates are staggered90Installation. whenD<1.5mtime,The entire tray of packing is loaded into the tower section;whenD>1.5mWhen the tower section is not connected by a flange,Prefabricate the filler into several blocks,Number binding hoop,Then it is sent into the tower and assembled into trays of packing. Materials available304、30408、321、316The316LWait. Detailed technical specifications refer to "Stainless Steel Orifice Plate Corrugated Packing"HG/T 21559.2-2005regulations.

Metal regular corrugated packing, stainless steel orifice plate corrugated packing or metal corrugated packingM250YRegular packing250YStainless steel metal orifice plate corrugated packing is assembled by punching holes, rolling small and large ripples on the surface of metal thin plates. It has the characteristics of low resistance, uniform gas-liquid distribution, high efficiency, large flux, and less obvious amplification effect. It is used in negative pressure and pressure operations.