Product Categories

Ningbo Gaopin Technology Co., Ltd

E-mail
13567427511@163.com
Phone
13567427511
Address
108 Jingyuan Road, Yinzhou District, Ningbo City, Zhejiang Province

Contact Now

Portable single pump suction gas detector

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NGP40-S portable single pump suction gas detector is mainly used for rapid and accurate detection of gas leaks or gas concentration exceeding the standard alarm. The main detection principles of gas detection include electrochemistry, infrared, catalytic combustion, thermal conductivity, PID photoionization, etc. Widely used in firefighting, emergency rescue, confined spaces, petroleum, chemical, metallurgical, refining, gas, warehousing, pharmaceuticals, environmental protection, air treatment and other occasions.

Product Details

Portable single pump suction gas detectionceremony

NGP40-S

NGP40-SPortable single pump suction gas detectorFeatures:

★ Built in pump suction measurement, switchable between diffusion and diffusion+pump suction detection methods.

★ Pump blockage alarm

★ LED lighting (optional)

★ Free switching of units, optional units:umol/mol、ppm、pphm、ppb、mg/m3、ug/m3、%VOL、%LEL

★ 8-button operation, quick one click calibration function

★ Data storage, with a storage capacity of no less than 100000 records

★ Communication interface: TYPE-C, optional: Bluetooth

★ Fall alarm

★ Data recovery function, partially or completely restoring factory data

★ Display of maximum, minimum, and weighted average values

★ Multiple alarm modes and alarm mode settings

Alarm methods: sound and light alarm, vibration alarm, voice alarm

Alarm types: concentration alarm, undervoltage alarm, fault alarm, pump blockage alarm

Alarm modes: low alarm, high alarm, interval alarm, TWA/SETL alarm

★ Misoperation recognition function, automatic identification and prevention of concentration calibration misoperation

★ Zero point automatic tracking to avoid zero drift

★ Multi level calibration of target points

★Intrinsic safety circuitDesign, explosion-proof, shockproof, anti-static, and radiation resistant

★ ProtectionIP68 rating, rain proof, immersion proof, and waterproofDust and anti-corrosion

★ Execution standards:

GBT 3836.1—2021General Requirements for Electrical Equipment Used in Explosive Gas Environments

GBT 3836.4—2021Inherent Safety Type "i" for Electrical Equipment Used in Explosive Gas Environments

GB T50493-2019 Design Standard for Combustible Gas and Toxic Gas Detection and Alarm in Petrochemical Industry

GB 15322.3-2019 "Combustible Gas Detectors Part 3: Portable Combustible Gas Detectors for Industrial and Commercial Use"

NGP40-SPortable gas detector Outline drawing:

便携单一泵吸式气体检测仪

Built in pump suction diffusion type Built in pump suction+sampling probe

water immersion test

便携单一泵吸式气体检测仪

NGP40-STechnical parameters of portable gas detector:

detection factor	Single gas（Combustible gas Ex, oxygenO2、Carbon monoxide CO, hydrogen sulfide H2S, carbon dioxide CO2, ammonia NH3, VOCs, etc
Testing Scope	Based on the on-site environment and user needs
resolution	0.001ppm (0-10ppm high-precision)/0.01ppm (0-10ppm); 0.01ppm (0-100ppm), 0.1ppm (0-1000ppm), 1ppm (above 0-1000ppm); 0.1%LEL； 0.1%、0.01%Vol
Unit Display	Optional units:umol/mol、ppm、pphm、ppb、mg/m3、ug/m3、%VOL、%LEL
Detection Principle	Electrochemical, catalytic combustion, infrared, thermal conductivity, semiconductor, PID photoionization, etc., depending on the range, on-site environment, and user requirements
sensor lifespan	electrochemistry2-3Catalytic combustion takes 2-3 years, infrared takes 5 years, thermal conductivity takes 2-5 years, PID takes 2 years
Detection method	Built in pump suction, switchable to diffusion type, diffusion+pump suction detection mode
display mode	LCD
Display content	Real time concentration, unit, gas name, alarm status, time, storage status, communication status, battery level, charging status, etc
detection accuracy	Typical accuracy: ≤± 3% FS (optional higher precision sensor)	uncertainty	≤±2%
Linearity	≤±3%	Repeatability	≤±2%
response time	T90 ≤ 20 seconds (universal)	recovery time	≤ 30 seconds (universal)
working power supply	DC3.7V*2
battery capacity	2100mAH rechargeable polymer battery with overcharge, overdischarge, overvoltage, short circuit, and overheating protection functions
Usage environment	Temperature: -20 ℃~+60 ℃, customizable -40 ℃~+70 ℃; Relative humidity: 10-95% RH
communication interface	Standard Type-C (fully charged in 2 hours)
data storage	The standard capacity shall not be less than 100000 pieces; Support local viewing, deletion, or data export, with arbitrary storage time interval settings
Interface language	Chinese, English, and other languages can be customized
explosion-proof type	Essentially Safe Exia Ⅱ CT4Ga
Protection level	IP68
Shell material	High strength, corrosion-resistant, fire-resistant polycarbonate and rubber protective cover, anti drop, wear-resistant, anti-static, effectively resistant to drops of ≥ 5 meters
Overall dimensions	165 × 64 × 61mm (L × W × H) including back clip thickness	Weight	About 280g
Standard Appendix	Calibration cover, pump suction nozzle, instruction manual, certificate of conformity, USB charger（Including dataLine), instrument packaging box
Optional accessories	① 0.2 meter swanneckSampling probe; ② Activated carbon filter; ③ 0.4-meter stainless steel sampling handle (including 1-meter hose); ④ 0.9-meter extendable sampling handle (including 1-meter hose); ⑤External Bluetooth printer.