-
E-mail
sdp_bj@163.com
-
Phone
17810614859
-
Address
No. 58 Hengtong Road, Fangshan District, Beijing
Beijing Xiean Tongda Electrical Equipment Co., Ltd
sdp_bj@163.com
17810614859
No. 58 Hengtong Road, Fangshan District, Beijing

Product Introduction
The RJ45-E/1 series 10/100M network signal lightning arrester is designed according to the IEC communication network lightning arrester standard and is suitable for lightning protection of 10BASE T or 10/100M adaptive Ethernet. The interface form of the product is a standard RJ45 interface, which protects lines 1, 2, 3, and 6. Plug and play, using the latest semiconductor devices, is suitable for lightning stroke and surge protection of high-speed Internet, and is extremely convenient for installation and maintenance.
Performance parameters:
| model | SDP-RJ45-E/1S | SDP-RJ45-E/1 |
| SPD type |
Combination type |
Combination type |
| Rated working voltage | 6VDC | 6VDC |
| Maximum continuous operating voltage Uc | 7.2VDC | 7.2VDC |
| insulation resistance | ≥0.1MΩ | ≥0.1MΩ |
|
Voltage protection level (1.2/50 μ s) Up line - line Line ground |
≤20V | ≤20V |
| ≤90V | ≤90V | |
| Nominal discharge current (8/20 μ s) In | 3kA, 10 times | 3kA, 10 times |
| Maximum discharge current (8/20 μ s) Imax | 5kA, 2 times | 5kA, 2 times |
| overstressed fault mode | Mode 2 | Mode 2 |
| rated current | 0.5A | 0.5A |
| Insertion loss (100MHz) | ≤0.5dB | ≤0.5dB |
| Maximum transmission rate | 155Mbps | 155Mbps |
| Interface type | (RJ45)1,2,3,6 | (RJ45)1,2,3,6 |
| response time | ≤1ns | ≤1ns |
| size |
Refer to the product appearance diagram |
|
| Shell material/shell protection level | Shielding metal aluminum/IP20 | |
|
Terms of Use |
Atmospheric pressure: 80kPa~160kPa | |
| Temperature: -40 ℃~+85 ℃ | ||
| Relative humidity: 5%~96% | ||
Scope of application:
Terminal PC network card surge protection
Surge protection for interfaces of other network devices
Appearance dimensions:
Product installation: