-
E-mail
sdp_bj@163.com
-
Phone
17810614859
-
Address
No. 58 Hengtong Road, Fangshan District, Beijing
Beijing Xiean Tongda Electrical Equipment Co., Ltd
sdp_bj@163.com
17810614859
No. 58 Hengtong Road, Fangshan District, Beijing

Product Introduction
The SDP-FS series signal lightning arrester has a compact size, 1P standard modularization, and 35mm rail installation. The interface can be accessed from both ends or from the same end, providing more flexible applicability for product installation. The product is designed with a standard 1U size, allowing multiple modules to be easily assembled into a rack mounted lightning protection module after being mounted on a 19 inch standard rack mounting rack. Different interface forms and voltage characteristics of lightning protection modules can be assembled or replaced according to actual needs, achieving a truly free and lightweight combination installation and use method.
Performance parameters:
| model | SDP-FS/100E* | SDP-FS/170T* | SDP-FS/24C* | SDP-FS/06B* |
| Rated working voltage | 6VDC |
170VDC |
24VDC |
6VDC |
| Maximum continuous operating voltage Uc | 7.2VDC | 175VDC | 30VDC | 7.2VDC |
| insulation resistance | >0.1MΩ | >2MΩ | >2MΩ | >0.1MΩ |
|
Voltage protection level (1.2/50 μ s, 0.5kV) Up line - line Line ground |
≤20V ≤90V |
≤380V ≤260V |
≤50V ≤90V |
≤ 20V (BNC core wire BNC shielding) |
| Nominal discharge current (8/20 μ s) In | 3kA, 10 times | 3kA, 10 times | 5kA, 10 times | 5kA, 10 times |
| Maximum discharge current (8/20 μ s) Imax | 5kA, 2 times | 5kA, 2 times | 10kA, 2 times | 10kA, 2 times |
| rated current | 0.5A | 0.5A | 0.5A | 0.5A |
| Communication tolerance | 2A,1s, 5 times | 2A,1s, 5 times | 2A,1s, 5 times | 2A,1s, 5 times |
| Impact tolerance capability | 1.5kV, 10/700 μ s, 10 times | 1.5kV, 10/700 μ s, 10 times | 1.5kV, 10/700 μ s, 10 times | 1.5kV, 10/700 μ s, 10 times |
| 37.5A, 5/300 μ s 10 times | 37.5A, 5/300 μ s 10 times | 37.5A, 5/300 μ s 10 times | 37.5A, 10/300 μ s, 10 times | |
| overstressed fault mode | Mode 2 | Mode 2 | Mode 2 | Mode 2 |
| insertion loss | ≤0.5dB(100MHz) | ≤0.5dB(10MHz) | ≤0.5dB(10MHz) | ≤0.5dB(10MHz) |
| transmission rate | 100Mbps | 10Mbps | 10Mbps | -(Characteristic impedance: 75 Ω Standing wave ratio: ≤ 1.2) |
| Series resistor | 1.5Ω | 1.5Ω | 1.5Ω | 1.5Ω |
| Interface type | RJ45(1,2,3,6) | RJ45(3,4,5,6) | Screw type terminal block | BNC interface |
| response time | ≤1ns | ≤1ns | ≤1ns | ≤1ns |
| size | Refer to the product appearance diagram | Refer to the product appearance diagram | Refer to the product appearance diagram | Refer to the product appearance diagram |
| Shell material/shell protection level | UL94V-0/IP20 | UL94V-0/IP20 | UL94V-0/IP20 | UL94V-0/IP20 |
| Installation method | 35mm standard guide rail | 35mm standard guide rail | 35mm standard guide rail | 35mm standard guide rail |
|
Terms of Use |
Atmospheric pressure: 80kPa~160kPa | Atmospheric pressure: 80kPa~160kPa | Atmospheric pressure: 80kPa~160kPa | Atmospheric pressure: 80kPa~160kPa |
| Temperature: -40 ℃~+70 ℃ | Temperature: -40 ℃~+70 ℃ | Temperature: -40 ℃~+70 ℃ | Temperature: -40 ℃~+70 ℃ | |
| Relative humidity: 5%~96% | Relative humidity: 5%~96% | Relative humidity: 5%~96% | Relative humidity: 5%~96% |
Appearance dimensions:

Product installation:
