RJ45 series 4-24 port 10/100M network signal lightning arrester

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

RJ45 series 4-24 port 10/100M network signal lightning arrester product introduction: The RJ45 series 4-24 port 10/100M network signal lightning arrester is designed according to the IEC communication network lightning arrester standard. The interface adopts standard RJ45 shielded/unshielded crystal joints, and uses the latest semiconductor devices. The maximum data transmission rate can reach 155Mbps, the nominal discharge current is 3kA, and the response speed is nanosecond level. It fully meets the requirements of lightning protection for various network equipment and network data transmission. The product installation and maintenance are extremely convenient

Product Details

RJ45 series 4-24 port 10/100M network signal lightning arrester

Product Introduction

The RJ45 series 4-24 port 10/100M network signal lightning arrester is designed according to the IEC communication network lightning arrester standard. The interface adopts standard RJ45 shielded/unshielded crystal joints and uses the latest semiconductor devices. The maximum data transmission rate can reach 155Mbps, the nominal discharge current is 3kA, and the response speed is nanosecond level. It fully meets the requirements of lightning protection for various network equipment and network data transmission. The product installation and maintenance are extremely convenient.

Performance parameters:

model	SDP-RJ45-E/4	SDP-RJ45-E/8	SDP-RJ45-E/16	SDP-RJ45-E/24
SPD port	Two ports	Two ports	Two ports	Two ports
SPD category	composite type	composite type	composite type	composite type
Number of protected ports	4	8	16	24
Rated working voltage	6VDC
Maximum continuous operating voltage Uc	7.2VDC
Maximum transmission rate	155Mbps
insulation resistance	>0.1MΩ
Voltage protection level (1.2/50 μ s, 0.5kV) Up lineLine ground	≤20V
	≤90V
Nominal discharge current (8/20 μ s) In	3kA, 10 times
Maximum discharge current (8/20 μ s) Imax	5kA, 2 times
Discharge current (shielding ground)	5kA
rated current	0.5A
Communication tolerance	2A,1s, 5 times
Impact tolerance capability	1.5kV,10/700μs10 times
	37.5A,10/300μs10 times
overstressed fault mode	Mode 2
Insertion loss (100MHz)	≤0.5dB
Series resistor	1.5Ω
Interface type	RJ45 interface (1, 2, 3, 6)
response time	≤1ns
failure mechanism	Short circuit or disconnection of network lines to ground
size	Refer to the product appearance diagram
Shell material/shell protection level	Shielded metal/IP20
Terms of Use	Atmospheric pressure: 80kPa~160kPa
	Temperature: -40 ℃~+85 ℃
	Relative humidity: 5%~96%

Scope of application:

Network switch and server protection in the network room
Protection of other network interface devices in the network computer room
Protection of other network devices

Appearance dimensions: