Radiodetection 6000DSL Cable Fault Tester

Radiodetection 6000DSL Multi functional Cable Fault Tester
The 6000DSL multifunctional cable fault tester integrates five types of tests: multimeter, insulation resistance test, wire pair quality and noise measurement, insulation fault location (RFL), and pulse reflectometer (TDR),
One connection can diagnose all problems on the cable.



























Radiodetection 6000DSLProduct Introduction of Multi functional Cable Fault Tester
The 6000DSL multifunctional cable fault tester integrates five types of tests: multimeter, insulation resistance test, wire pair quality and noise measurement, insulation fault location (RFL), and pulse reflectometer (TDR),
One connection can diagnose all problems on the cable.

Radiodetection 6000DSLProduct Features of Multi functional Cable Fault Tester
The instrument has both diagnostic and fault location functions.
The multimeter function measures DC voltage, AC voltage, external battery, resistance, and insulation resistance.
● Wire to wire quality testing, measuring circuit current, metal lines, noise and power interference, longitudinal balance.
The pulse reflectometer (TDR) can accurately locate cable faults such as open circuits, short circuits, water ingress, overlaps, and damages that can be detected by various TDR products.
● Insulation Fault Localization (RFL), with three testing modes, can perform insulation fault localization for both double and single lines.
Capacitance meter - measures the electrical capacity at the end of the cable or locates faults caused by open circuits.
The special function of STRESS TDR involves detecting cable faults caused by moisture intrusion.
Easy to operate, easy to learn and use, with a comfortable keyboard that allows operators to easily switch functions.
● Automatic testing and fault analysis function - Press the "automatic button" to allow the instrument to perform basic diagnostic tests.
● SUPER STOR has a super waveform data storage function, which can also store the results of automatic testing for operators to conduct later analysis.
Optional oscillator and probe, after testing is completed, analyze wire pairs, open and closed circuits, and then connect them again.
WAVE-VIEW software can archive, print, and analyze waveform diagrams on a computer.

Radiodetection 6000DSLProduct Parameters of Multi functional Cable Fault Tester

test scope	Suitable for twisted pair communication cables and power cables, 0-3m to 0-12km, 13 ranges, with graphic magnification function
multimeter	DC voltage 0 to 400V resolution 0.1V accuracy 1% ± 0.1V AC voltage 0 to 400V resolution 0.1V accuracy 2% ± 0.1V Battery 2 to 400V resolution 0.1V accuracy 1% ± 0.1V Resistance 0 to 1999.9 Ω, resolution 0.1 Ω, accuracy 0.2% ± 0.2 Ω 2K Ω to 10K Ω resolution 1 Ω accuracy 0.2% ± 1 Ω
insulation resistance	50V/100V/250V/500V 0 to 49.99M Ω resolution 0.01M Ω accuracy 0.2% ± 0.01M Ω 50M Ω to 99.9M Ω resolution 0.1M Ω accuracy 4% 100M Ω to 999M Ω resolution 1M Ω accuracy 10%
Capacitance meter	0 to 100M resolution 0.1M accuracy 2% ± 1M 100 to 1000M resolution 1M accuracy ± 3% 1000 to 10000M resolution 10M accuracy ± 5% 10000 to 50000M resolution 100M accuracy ± 8%
Online quality testing	Loop current 2 to 120mA resolution 0.1mA accuracy 5% ± 0.2mA Noise balance test 0 to 50dBrnC resolution 1dB accuracy ± 2dB Power interference 40 to 100dBrnC resolution 1dB accuracy ± 2Db Intervention loss 0 to 60Db frequency range 50HZ to 2MHz resolution 1dB Output levels 0 and -10 dB Chromaticity brightness interference 0 to 40Db frequency range 50HZ to 2MHz resolution 1dB Output levels 0 and -10 Db Frequency range: 50Hz to 2MHz Vertical balance 40 to 62dB frequency resolution 1dB accuracy ± 2dB Resistance: 100120135600900 Ω
power spectral density
	Dynamic range: -20dB/Hz to -140dB/HZ Frequency range: 20kHz to 2MHz Resolution: 10kHz Resistance: 100120135 Ω
Pulse Reflectometer (Inductive and Non Inductive Cables) (TDR)
Maximum testing range	When the VOP of the working waveform is 99.0%, test for 19.4km When VOP is 60.0%, test 11.7km When the stored waveform VOP is 99.0%, test for 3.6km When VOP is 60.0%, test 2.2km The range varies depending on the VOP value
Horizontal resolution	Horizontal resolution<610 meters<0.07m when VOP is 99.0% When VOP is 30.0%, it is less than 0.02m >610 meters 0.1m (VOP is any value)
output signal	2ns, 25ns, 500ns, 100ns, 1.5 μ s, 4.4 μ s, and 330 μ s
Vertical sensitivity:	>65dB
Output balance	Can vary between 80 Ω and 120 Ω
distance accuracy	± 0.15 meters ± 0.01% of the reading
filter	Standard: 8 x, 50/60Hz Optional: 4 x, 8 x, 16 x, 32 x, 64 x, 128 x, 50/60Hz
Insulation fault location
positioning range	0 to 45km
Fault resistance range	0 to 50M Ω
precision	3-wire test ± 0.25% × DTS ± 0.4ohms 4-wire test ± 0.25% × DTS ± 0.25 ohms Kupffer test ± 1.0% × DTS ± 1ohm
波形存储	Standard 8 waveforms, 32 waveforms can be selected
Remote devices and oscillators	Analyze issues such as line pairing, open and closed circuits, and re bonding.
size	Excluding accessories and backpack, 160mm x 240mm x 60mm, weight 1.3kg Including accessories and backpack 198mm × 279mm × 165mm, weight 2.6kg Remote device: 216mm × 100mm × 40mm, weight 0.4kg Oscillator/Remote 230mm × 35mm × 25mm Weight 210g
Attachment (Standard)	instructions; 110V or 220V charger; Test cable, VOP card
(Optional)	Waveform storage, TDR noise filter;

Radiodetection 6000DSLProduct Configuration of Multi functional Cable Fault Tester

● Host ● Instruction Manual ● 110V or 220V Charger ● Test Cable ● VOP Card