Rapid determination kit for fluoride ions in water

Fluorine determination kit 0-1.5mg/L

【 Measurement Range 】0-0.1-0.2-0.3-0.5-0.7-1.0-1.5mg/L

Used for electroplating wastewater, drinking water, surface water, groundwater and other water samples.

1. Intuitive display: high accuracy, strong anti-interference ability, and feedback of detection results in the most intuitive way.

2. On site analysis: On site analysis eliminates the need to transfer samples to the laboratory, saving time and space.

3. Cost saving: Accurate dosage, only necessary usage is needed to save chemical reagents and control costs.

4. Easy to operate: Easy to operate, foolproof operation does not require professional knowledge and experimental skills.

5. We specialize in research and development for rapid on-site testing. Automated production equipment, a comprehensive quality management system, and standardized control throughout the entire production process provide strong support for standardized and large-scale production.

【 Measurement steps 】

Step 1: Rinse the colorimetric tube 1-2 times with the water sample to be tested, and add water sample to the 10mL mark on the tube.

Step 2: Add 1 packet of fluoride (I) assay reagent.

Step 3: Cover the lid and shake well to dissolve.

Step 4: Add 1 milliliter of fluoride (I) measuring reagent.

Step 5: Cover and shake well, then let it sit for 5 minutes.

Step 6: Unscrew the tube cover, raise the colorimetric tube to a blank space 1cm above the standard color card, and visually measure the colorimetric value from the tube mouth downwards (measured as F -).