Rubber Compression Deformer

NegotiableUpdate on 03/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ZB-918 rubber compression transformer consists of parallel steel plates, limiters, and fasteners, used for vulcanizing rubber and thermoplastic rubber. Under normal and high temperature conditions, the rubber deformation is measured after a certain compression rate and compression time.

Product Details

Machine model: ZB-918Rubber Compression Deformer

One Product Usage

ZB-918typeRubber Compression DeformerComposed of parallel steel plates, limiters, and fasteners, it is used for vulcanized rubber and thermoplastic rubber at a certain compression rate under normal and high temperature conditions,Measure the deformation of rubber after a certain compression time.

2、 Applicable standards:

Meets the requirements for measuring compression deformation of vulcanized rubber and thermoplastic rubber under normal and high temperature conditions in GB7759, ISO815, and GB1683 standards, and needs to be used in conjunction with an aging chamber under high temperature conditions.

III Product parameters:

GB7759AType:
Sample size:	Diameter 29 ± 0.5mm, height 12.5 ± 0.5mm
When the compression rate is 25%	限制器高度：	9.3～9.4mm
Compression rate of 15%time		10.6～10.7mm
Compression rate 10%time		11.25～11.3mm
GB7759BType:
Sample size:	Diameter 13 ± 0.5mm, height 6.3 ± 0.3mm
When the compression rate is 25%	限制器高度：	4.7～4.8mm
Compression rate of 15%time		5.3～5.4mm
Compression rate 10%time		5.65～5.7mm
GB1683：
Sample size:	Diameter 10 ± 0.2mm, height 10 ± 0.2mm
When the compression ratio is 40%	限制器高度：	6±0.02mm
Compression rate 30%time		7±0.02mm
Compression rate of 20%time		8±0.02mm

4 Standard equipment list:

Specifications (default one out of four)	name		quantity
GB7759-1996Atype	Circular compression plate		4block
	limiter	high9.3～9.4mm	9a
		high10.6～10.7mm	9a
		high11.25～11.3mm	9a
	hex bolt+nut		each3a
GB7759-1996Btype	Circular compression plate		4block
	limiter	high4.7～4.8mm	9a
		high5.3～5.4mm	9a
		high5.65～5.7mm	9a
	hex bolt+nut		each3a
GB7759.1-2015	Circular compression plate		2block
	fixed base		1block
	bolt+nut+Metal gasket, washer		1set
	dowel pin		1only
	Limiter（AType)	10%compression ratio	1a
		15%compression ratio	1a
		25%compression ratio	1a
	Limiter（BType)	10%compression ratio	1a
		15%compression ratio	1a
		25%compression ratio	1a
GB1683	Compression board (rectangular)		2block
	limiter	high6.0mm	2a
		high7.0mm	2a
		high8.0mm	2a
	hex bolt+nut+metal washer		each2a