Rust proof turbine oil coalescence separation oil filter

NegotiableUpdate on 05/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rust proof turbine oil coalescence separation oil filter can quickly and effectively separate impurities and moisture in the oil. No heating required, easy to operate. Very suitable for low viscosity oils, such as regular diesel, gasoline, kerosene, and turbine oil.

Product Details

Rust proof turbine oil coalescence separation oil filtercharacteristic:

1) This model of oil filter adopts a specially designed oil-water separation filter, which does not require heating, ensuring that the additives in the oil do not crack or deteriorate, and the quality of the dehydrated oil can be guaranteed.

2) Easy to operate, capable of running water discharge online without the need for human supervision.

3) This type of equipment has standard and explosion-proof types.

This machine is equipped with comprehensive protective devices. By implementing comprehensive protection for temperature, pressure, vacuum degree, power outage, etc. through various execution components, the machine can effectively prevent accidents and ensure the normal operation of the equipment.
The automatic control protection system consists of sensors, motors, protective components, and other components. The factory pressure protection control point of the pressure controller is set to 0.3Mpa. When the working pressure reaches the set point, the whole machine will alarm and stop working to prevent accidents.

parameter name	unit	TYB-10	TYB-20	TYB-30
traffic	L/min	10	20	30
work pressure	Mpa	≤0.3
power supply		380V/50Hz (can be customized according to user requirements)
operating noise	dB（A）	65
Total electric power	KW	0.55	0.75	1.1
Inlet (outlet) pipe diameter	mm	25	25	32
Equipment weight	Kg	140	150	160
Filter cartridge size	mm	Φ110*250		Φ150*300
Overall dimensions	mm	7006001000	7506001100	8006501150
Water content in oil	PPm	≤ 300 (cyclic processing) (GB/T260)
filtration accuracy	µm	5~10
Emulsification value	Min	≤15
mechanical impurities	%	None (GB/T511)

Rust proof turbine oil coalescence separation oil filterWorkflow:

Unqualified oil first enters the primary filtration, where large particle impurities are intercepted. The oil with large particle impurities removed is then transported to the fine filter by the oil pump. After removing smaller impurities in the fine filter, it continues to enter the coalescence separator, where the principle of molecular separation technology is used to perform pressure swing analysis on the oil, eliminate intermolecular binding forces, and dissolve water, free water, and quickly break the oil film to separate from oil molecules and precipitate; At this point, dehydration and impurity removal are completed to meet the required moisture and cleanliness requirements.