Welcome Customer !

Membership

Help

Shanghai Wenhong Electrical Equipment Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products
Product Categories

Shanghai Wenhong Electrical Equipment Co., Ltd

  • E-mail

    18621887597@163.com

  • Phone

    18621887597

  • Address

    555 Chenchuan Road, Baoshan District, Shanghai

Contact Now

SCWY series three-phase AC parameter stabilized power supply

NegotiableUpdate on 05/23
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

SCWY series three-phase AC parameter stabilized power supply ● Product Overview SCWY-III series three-phase AC parameter stabilized power supply is a power supply device that uses the principle of ferromagnetic equivalent parameter oscillation and synchronous tracking compensation to achieve stable AC output voltage and good bidirectional anti-interference performance

Product Details

SCWY series three-phase AC parameter stabilized power supply
● Product Overview

SCWY-III seriesthreeThe cross current parameter stabilized power supply is a power supply device that uses the principle of ferromagnetic equivalent parameter oscillation and synchronous tracking compensation to achieve stable AC output voltage and good bidirectional anti-interference performance. The major structural feature is the absence of electronic equipment, high environmental adaptability, and stable and reliable performance.

● Main features

1. Wide voltage regulation range and high output accuracy: output voltage of 380 ± 1-5%; The working range of input voltage can reach 380V ± 20% (customizable wide range).

2. Extremely short response time and unique excellent dynamic characteristics. It can be restored in 10-40ms, which is several tens of times faster than mechanical adjustment regulators.

3. Anti lightning strike, anti surge, wideband suppression of interference

The anti-interference frequency band is wide (200HZ-2MHz), and the amplitude effect can be considered the first. Low pass filters for other power sources typically have a low-end cutoff frequency above 100KHZ, with only a few able to achieve 10KHz

Constant mode interference suppression greater than 50DB

Differential mode interference suppression greater than 200:1

The lightning resistance capability can reach 6000VPP (10 μ s/700 μ s)

The anti surge capability can suppress the surge voltage of 5KHZ at the input end up to 2000V without affecting the operation of electrical equipment.

4. Improve waveform distortion, even if the input waveform distortion reaches 30%, the output voltage waveform distortion can still be maintained below 2.5%.

5. The three-phase output phase and line voltage balance is excellent, allowing for a three-phase voltage imbalance of up to 50% and a current imbalance of up to 50%.

6. Phase loss protection function: With a unique three-phase magnetic flux balance circuit design, it can maintain normal three-phase voltage output even in the absence of phase, providing operational protection for equipment (below 30KVA). There is a fundamental difference in the design of circuits for phase loss alarm and mechanical tripping and power-off.

7. Wide load adaptability, strong overload capacity, and unique output load short-circuit self-protection function. When the output terminal is short circuited, the output voltage automatically drops to zero due to changes in magnetic flux distribution in the magnetic circuit, entering a protective state. At the same time, the input current is also limited, which does not affect the operation of the power supply line, effectively protecting the load and preventing disasters from occurring. There is a fundamental difference between mechanical tripping and traditional circuit breakers.

Extremely reliable: no mechanical adjustment device, simple structure, reliable operation, can be regarded as semi permanent equipment

● Technical parameters

input voltage

380V ± 20% (customizable wide range)

phase number

model

output voltage

380 ± 1-5% (adjustable)

three-phase

SCWY-III-1.5KVA

input frequency

50HZ/60HZ

SCWY-III-3KVA

dynamics

Strain time of 10-40ms (with any fluctuation in the stable voltage range), on/off overshoot amplitude: < 40V

SCWY-III-6KVA

Harmonic correction capability

Input waveform distortion ≤ 30%, output waveform distortion < 2.5%

SCWY-III-10KVA

operational efficiency

0.98

SCWY-III-15KVA

power factor

COS¢≥0.99

SCWY-III-20KVA

interference resistance

Peak suppression: (normal mode input 3KV peak signal, output ≤ 30VP), normal mode interference suppression ≥ 50-110dB, differential mode interference suppression ≥ 200:1, interference spectrum width: 200Hz-2MHz, bidirectional anti-interference, can suppress load interference to the power grid

SCWY-III-25KVA

Surge resistance capability

Input terminal 5KHZ, voltage ≤ 2000V

SCWY-III-30KVA

Lightning resistance capability

可耐受6000 VPP(10μs/700μs)

SCWY-III-40KVA

Isolation characteristics

The potential difference between the neutral and ground wires at the output end is less than 0.5V

SCWY-III-50KVA

Phase loss protection characteristic

Input phase loss, output complete three-phase, output accuracy 380 ± 5%, can run for a long time (models below 30KVA)

SCWY-III-60KVA

working environment

Temperature -25 ℃ -+45 ℃. Relative humidity<95%, altitude below 4K meters

SCWY-III-75KVA

Operation mode

continuous

SCWY-III-100KVA

cooling method

Natural cooling or air cooling

SCWY-III-120KVA

Three phase unbalance accuracy

Phase line voltage ≤ 1.5% Line voltage ≤ 2%

SCWY-III-150KVA

safety standards

Compliant with CQC national security standards

SCWY-III-200KVA

reliability index

Minimum MTBF (Mean Time Between Failures) ≥ 120000 hours

Can be customized according to user needs

technical indicators

Compliant with SJ/T10541-94 national standard

● Application scope

This product is widely used in various industries such as scientific research, universities, aviation, aerospace, nuclear industry, railways, telecommunications, banking, finance and taxation, commerce, hospitals, radio stations, television stations, satellite space stations, electronics, textiles, chemicals, petroleum, public security, military, and confidential agencies. It is also suitable for use as an isolation, anti-interference, and high-precision power supply for large, medium, and small electronic computers, microcomputers, numerical control systems, program control systems, analytical instruments, fax machines, copiers, color amplifiers, printing and typesetting equipment, computer embroidery machines, audio systems, and other high-precision electrical appliances in industrial and mining enterprises. It is also suitable for use as a high-quality power supply for general electromechanical and electronic electrical equipment. It can ensure the normal operation of equipment, protect equipment from damage, and extend the service life of equipment.