SDP-GPS antenna feeder lightning arrester

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SDP-GPS antenna feeder lightning arrester product introduction: The SDP-GPS antenna feeder lightning arrester is carefully designed and manufactured according to relevant standards such as IEC. The product uses high-quality components as 8/20us lightning protection

Product Details

SDP-GPS antenna feeder lightning arrester

Product Introduction

The SDP-GPS antenna feeder lightning arrester is carefully designed and manufactured in accordance with relevant standards such as IEC. The product uses high-quality components as 8/20us lightning protection. Suitable for protecting the global positioning system from damage caused by lightning strikes, static electricity, and other overvoltage introduced by the system feeder. Easy to install, no maintenance required, response speed in nanoseconds, low insertion loss. It has complete protection performance and excellent technical indicators, fully complying with international and domestic standards such as GB, IEC, VDE, etc.

Performance parameters:

model	SDP-GPS-B5	SDP-GPS-N5
SPD port classification	Two ports	Two ports
SPD category	Combination type	Combination type
interface form	BNC F/M	N F/M
Nominal operating voltage Un	5VDC	5VDC
Maximum continuous operating voltage Uc	7.2VDC	7.2VDC
insulation resistance	0.1MΩ	0.1MΩ
Rated load current IL	2ADC	2ADC
Working frequency range	1.5~1.6GHz	1.5~1.6GHz
Nominal discharge current In	10kA	10kA
Voltage Standing Wave Ratio	≤1.2	≤1.2
insertion loss	≤0.5dB	≤0.5dB
Voltage protection level Up	≤18V(1.2/50μs,0.5kV)	≤18V(1.2/50μs,0.5kV)
characteristic impedance	50Ω	50Ω
working environment	Indoor (-40 ℃~+85 ℃)	Indoor (-40 ℃~+85 ℃)
Shell protection level	IP20	IP20

Scope of application:

Global Positioning GPS System Protection

Appearance dimensions:

Product installation: