SDP-JK series multifunctional combination lightning arrester

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SDP-JK series multifunctional combination lightning arrester product introduction: The SDP-JK series multifunctional combination lightning arrester is designed according to IEC lightning protection requirements and the specific application of CCTV surveillance cameras. It is suitable for lightning protection of surveillance cameras with AC/DC power supply and (or without) pan tilt control ports

Product Details

SDP-JK series multifunctional combination lightning arrester

Product Introduction

The SDP-JK series multifunctional combination lightning arrester is designed based on IEC lightning protection requirements and the specific application of CCTV surveillance cameras. It is suitable for lightning protection of surveillance cameras with AC/DC power supply and (or without) pan tilt control ports. Multi functional surge overvoltage protection, integrated design, high-speed response, low loss, and equipped with power lightning protection failure LED indicator, reduces protection costs and installation difficulties, minimizes installation space, and maximizes the use of equipotential protection principle to greatly improve protection effect. All protection functions of the product are designed with a maximum current capacity of 10kA and adopt a two-stage series linkage protection, which can fully and comprehensively protect CCTV monitoring equipment.

Performance parameters:

model	SDP-JK3/220	SDP-JK2/220	SDP-JK3/024	SDP-JK2/024
function	Power/Video/Control	Power/Video	Power/Video/Control	Power/Video
Failure indication	When the Function Indication indicator light on the Line In panel goes out The surge protector has lost its lightning protection function. Please contact the distributor or our company.
Number of ports	Two ports
Shell material/shell protection level	Shielding metal aluminum/IP20
Terms of Use	Atmospheric pressure: 80kPa~160kPa Temperature: -40 ℃~+85 ℃ Relative humidity: 5%~96%
Power protection parameters
Nominal operating voltage Un	220VAC		24VAC
Maximum continuous operating voltage Uc	320VAC		30VAC/42VDC
Nominal discharge current In (8/20 μ s)	5kA		5kA
Maximum discharge current Imax (8/20 μ s)	10kA		10kA
Voltage protection level Up (8/20 μ s, 5kA)	700V		120V
Video/Audio Protection Parameters
Nominal operating voltage Un	6VDC
Maximum continuous operating voltage Uc	7.2VDC
insulation resistance	≥0.1MΩ
Nominal discharge current In (8/20 μ s)	5kA
Maximum discharge current Imax (8/20 μ s)	10kA
Voltage protection level Up (1.2/50 μ s)	20V (BNC core wire - BNC shielding)
Rated load current IL	DC500mA
overstressed fault mode	Mode 2
Insertion loss (10MHz)	≤0.5dB
characteristic impedance	75Ω
Standing Poppy	≤1.2
Series resistor	1.5Ω
Communication tolerance	2A,1s, 5 times
Impact tolerance capability	1.5kV,10/700μs 37.5A,5/300μs
PTZ control signal protection parameters (only available for SDP-JK3/* * *)
Nominal operating voltage Un	24VDC
Maximum continuous operating voltage Uc	30VDC
insulation resistance	≥2MΩ
Nominal discharge current In (8/20 μ s)	5kA
Maximum discharge current Imax (8/20 μ s)	10kA
Voltage protection level Up (1.2/50 μ s)	85V (wire BNC shielding)
Rated load current IL	DC500mA
overstressed fault mode	Mode 2
Insertion loss (10MHz)	≤0.5dB
characteristic impedance	----
Standing Poppy	≤1.2
Series resistor	1.5Ω
Communication tolerance	2A,1s, 5 times
Impact tolerance capability	1.5kV,10/700μs 37.5A,5/300μs

Scope of application:

Equipped with pan tilt camera protection
Without pan tilt camera protection
Protection of other similar signal processing equipment

Appearance dimensions:

Product installation: